To remove the factory antenna from a 1999 Jeep TJ, first, locate the antenna base on the fender. Use a wrench or socket to unscrew the nut securing the antenna to the base. Once the nut is removed, gently pull the antenna out from the base. If necessary, disconnect any attached wiring or clips to complete the removal.
The correct factory tire size for a 1999 Jeep Cherokee is 225/70R15.
Remote start was not available on a 1999 Jeep.
The correct factory tire size for a 1998 Jeep Wrangler is P215/75R15.
Not factory.Not factory.
look uner the rear of the right front wheelwell. You should see a plastic cover with pushpins. Remove it and you should have access to the antenna.
NO! they have different bolt spacing
The relay for the power antenna on a 95 jeep grand Cherokee is located inside the glove box. You have to remove a panel that is in the "floor" of the glove box and there are several relays in there. There are 6 small relays and 6 large relays, the antenna relay is the top left large relay.
Very carefully
you dont have to remove the frame as long as you get a top that is made for factory frames. they will ask if you have a factory frame when ordering your new top
I was able to remove the existing power antenna on my '92 Cherokee through the wheel well. You have to remove three of the nuts attaching the plastic to the fender as well as pull out two plastic plugs. Pull back the plastic and you will see the power antenna right there. Good luck, Woody
There is no such vehicle as a Jeep Cirus
how do I replace a power antenna on my jeep Cherokee 1992