0
when Ford assembled the car they put the drum on and then put a crimp at the edge of all the lug bolts. take a wire brush and clean around the lugs right at the drum and you will see where the threads are pinched, by doing this the miss shaped metal holds the drum tight on the axle, use a grinder or a file to remove the burrs and the drum can be removed with a mall, be careful not to damage the lugs to much when doing this.
What else can I help you with?
How do you remove brake drum on 1991 Mazda 323?
how do remove the brake drum on a 1991 mazda 323
How do you remove front brake drum on kawasaki mule 2500?
You can remove the front brake drum, on your Kawasaki Mule 2500, by removing the wheel and axle. The brake drum will slide off.
How do you remove rear brake drum from a 1993 Toyota pickup?
How do you remove rear brake drum from a 1993 Toyota pickup?
How do you remove rear brake drum on a 2004 suzuki XL-7?
how do you remove rear brake drum on a suzuki 2004 xl7
How to release brake pad from rear wheel drum?
If you're trying to remove the brake drum, be sure to NOT have the emergancy brake on. Remove the wheel and tap the drum with a rubber mallet until it releases, That's it!
How do you remove a rear brake drum on a Chrysler?
To remove a rear brake drum on a Chrysler, first ensure the vehicle is safely elevated and secured on jack stands. Remove the wheel, then locate and remove any retaining screws or clips securing the drum. If the drum is stuck, gently tap it with a hammer or use a brake drum puller to loosen it. Once free, slide the drum off the hub to access the brake components.
I have managed to remove the rear brake drum on a 1991 Honda Accord but in the future how do you keep the hub from rusting to the rear brake drum?
Light coating of grease on the axle flange before reinstalling, or create a wax paper gasket and put in before installing drum.
How do you replace a 91 Nissan Stanza drum brake?
To replace the drum brake on a 1991 Nissan Stanza, start by safely lifting the vehicle and removing the wheel. Next, remove the brake drum by unscrewing any retaining screws and gently tapping it if it's stuck. Take note of the brake shoe configuration, then remove the old brake shoes and springs. Finally, install the new brake shoes, reassemble the drum, and ensure everything is properly adjusted before putting the wheel back on and lowering the car.
Remove a rusty rear brake drum on a 1975 corvette?
Better hope it is not a drum brake- it was originally equipped with a disc brake caliper.
How do you remove a rear brake drum on a 2002 grandam?
To remove the rear brake drum on a 2002 Pontiac Grand Am, first ensure the vehicle is safely lifted and secured on jack stands. Remove the wheel and tire, then locate the drum's retaining screws, if present, and remove them. Use a brake drum puller if necessary to avoid damaging the drum, then gently pull the drum off the wheel hub. If the drum is stuck, you may need to adjust the brake shoes inward by accessing the adjuster through the inspection hole on the backing plate.
Is there something holding rear brake drum on 1994 caviler what holds rear brake drum on 1994 cavalier after removing tire?
how to remove rear brake drum on 1994 cavalier
How do you change a wheel cylinder on 1997 Grand Am GT?
Remove wheel Remove brake drum Loosen and remove brake line Remove mounting bolts Pry wheel cylinder off brake shoes Install new cylinder Replace brake lines Replace brake drum Bleed affected brake line
