there is a pin on the switch which must be depressed to remove the unit from the dash.
Have to remove the transmission.
Below and to the left of the steering wheel, it is a pull out style knob.
if you lift the engine hood there should be 4 nuts by where your headlight bulb fits into the housing.they should be size 12mm nuts.just remove those 4 nuts and the headlight bulb retainer(you remove that by twisting counter clockwise) and your headlight assembly should pull right off
faq sheet comes with new lamps has pictures on how to. also service manual chiltons 8271 has details.
located in the fuel tank probably have to remove for access
To replace the headlight housing on a 1992 Ford Tempo, you will first need to access the back of the headlight assembly by opening the hood. Locate the retaining clips or screws holding the housing in place and remove them carefully. Disconnect the electrical connector from the back of the headlight bulb, then remove the old housing and replace it with the new one. Secure the new housing in place with the retaining clips or screws, reconnect the electrical connector, and test the headlight to ensure it is working properly.
There should be a silver button on the side of the switch (behind dash area) Depress this button, pull the knob competely out of the switch Unscrew bezel and switch should come out from behind the dash Ford suggest changing the connector also at this time
how do you reset a fuel pump switch on a 1993 ford tempo
Take off the old one and put a new one back in that spot.
How do you replace the PCM ON A 1994 Ford Tempo GL?
how do you replace front door actuator for 93 ford tempo
Remove ALL dashboard screwscarefuly remove the dashboard,andyou will see were the bulbs are located,replace any/and/or/allthe bulbs needed,and reverse theprocedure to reinstall ! That's it !