To remove the inside rear door panel on a 2000 Chevy Astro, start by removing any screws located around the panel, usually near the armrest and door handle. Next, carefully pry off the panel using a trim removal tool to disengage the clips holding it in place. Once the clips are released, lift the panel upward to detach it from the door. Finally, disconnect any wiring harnesses for power windows or locks before fully removing the panel.
The 2000 Chevy Astro sliding door panel is held in place by two retaining screws and eight retaining clips. Remove the retaining screws and pry outward on the retaining clips.
The only way is to remove the inside door panel (not an easy job with the door closed). Once the panel is removed, you'll have access to the latch mechanism. You will be having to remove this panel to put a new door handle on anyway.
Remove the inside door panel of your Chevrolet Astro Van. Remove the wiring harness from the mirror. Remove the side mirror retaining bolts.
You have to remove the inside panel, where the window crank is, or would be.
The 2002 Chevrolet Astro Van passenger door panel is held in place with two retaining screws and eight retaining clips. Remove the retaining screws and pry outward on the retaining clips.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
how do i remove the passenger door inside panel?
Remove the dppr panel and there are screws on the inside.
behind right kick panel
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
remove the inside door panel and you'll see how it attaches on the inside of the door.
You will have to remove the entire door panel to get at the screws that hold the handle assembly to the panel.