0
What else can I help you with?
How do you remove the rear seat in a 1993 Chrysler LeBaron convertible?
To remove the rear seat in a 1993 Chrysler LeBaron convertible, start by locating the seat cushion release clips or bolts at the front of the seat. Pull or unscrew these fasteners to detach the seat cushion, then lift it out. Next, access the rear seat back by locating the bolts or clips securing it to the vehicle frame, usually found at the bottom or sides. Remove these fasteners, and then gently pull the seat back away from the body to fully detach it.
How do you remove the rear seat back in a 1992 Chrysler LeBaron Convertible?
To remove the rear seat back in a 1992 Chrysler LeBaron Convertible, first, locate the retaining bolts at the bottom of the seat back; these are usually accessible from the trunk. Use a socket wrench to remove the bolts. Once the bolts are removed, gently pull the seat back upward and away from the seat base to detach it. Be cautious of any clips or connectors that may also need to be released.
Where is convertible top motor located on a 1995 Chrysler LeBaron?
It is behind the rear seat.It is behind the rear seat.
How do you remove headrest on 91 Chrysler Lebaron?
Unzip back. Remove upholstry rings on the two bottom metal rods then slide the rear one half way out to fold it up. Remove rings holding middle metal rod. Push headrest halfway down. Slide a screwdriver up the front of the headrest post to keep the release lever from closing while removing the headrest. It is located behind the front seat foam. I have a 93 Lebaron GTC Conv
Where is the pump for your convertible lebaron top motor?
behing the rear seat
Where is the motor for the convertible on a 1992 Chrysler lebaron?
It is behind the rear seat.
Does a 1994 Chrysler LeBaron convertible have a reservoir for the convertible top motor?
Yes, behind rear seat.Yes, behind rear seat.
How do you remove rear seat from 1997 Mercury Villager?
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
How do you remove the rear seat of a 2001 sonata?
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
How do you remove the rear seat on the 1997 Mercury Villager?
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
How do you fold down the rear seat on a Chrysler lebaron?
It doesn't fold down. It is bolted in place.
How do you remove the rear seat of 1997 Mercury Villager?
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
