To remove the drive belts on a 1988 Plymouth Reliant 2.2, first, ensure the engine is off and cool. Locate the belt tensioner and use a wrench or ratchet to relieve tension on the belt, allowing you to slip it off the pulleys. If there are multiple belts, note their routing for reinstallation, and repeat the process for each belt. Finally, remove any additional components if necessary to access the belts more easily.
Yes
the answer is no
You have to remove the drive side tire and the wheel cover to get to the battery.
very carefully
reliant regal
how do you replace the drive belts on an 1974 mercedes 230
Reliant Robin
As Reliant Robin is not classed as a car but a tricycle you do not need to have a qualified driver with you.
Undo the hoses remove drive belts from pulleys undo pulley bolt and remove pulley no special tool needed should slide off remove bolts at front of pump remove pump
First you need access to it if its in the car. Remove the air cleaner, starter, and right drive axle. Use a chisel or a punch to turn it sideways. If it has a hole in it, you can pry it out using the hole. To install find a socket that just fits inside the freeze plug. Use red lock tight on the hole in the block. Drive in the plug with a hammer as squarely as possible.
A 1990 Plymouth Voyager is a ( front wheel drive vehicle )
Belts or Tape Drive Belts