The grill if I recall correctly is one unit. What I mean by one unit is that the grill housing goes around the headlights / around the whole front of the vehicle. I have a 1998 Ford Expedition XLT. I ended up cutting my grill out of the housing and installing an aftermarket one in its place.
To remove front grill on a 1999 seat Ibiza, remove the 6 tabs on the hood. Then unscrew the front grill and release the 4 clips that hold the grill in place.Ê
open the hood, there are two bolts, one on left side, one on right side, loosen and remove these for starters, I believe that the rest of the assembly slides into mounts
You have to remove the entire dash assembly.
disconnect the cable from the negative terminal on the battery. remove the left side wiper and cowl grill. remove the wiper linkage assembly bolt and nut. remove the wiper link and unplug the electrical connector. remove the motor assembly to chassis bolt, detach the motor from the bracket and lift it from the cowl opening. put the new one in in reverse.
== ==
under grill between bonnet [hood] and windscreen you need to remove grill to get to it
look inthe door jam of the door your working on. find the rivittward the bottom. remove the door panel, and unplug the door lockmotor. drill out the rivit and remove the motor by lifting forward and watching the hook sliding it from the door latch assembly.
It is more difficult than it needs to be. You must remove the front grill, and then remove the headlight assembly. A useful link is here: http://www.suzuki-forums.com/1g-1999-2005-vitara-grand-vitara/17607-how-do-i-replace-bulbs-headlight.html
You will have to remove the front axle assembly to have enough clearance to remove the oil pan in vehicle.You will have to remove the front axle assembly to have enough clearance to remove the oil pan in vehicle.
Remove the rocker assembly and pressure test the cylinders.Remove the rocker assembly and pressure test the cylinders.
Remove the complete wiper assembly from the bottom of the windshield. This will give you room to remove the alternator.
To remove the headlight from a 1999 Oldsmobile Eighty Eight, first, open the hood and locate the headlight assembly. Disconnect the electrical connector by pressing the tab and pulling it out. Next, remove the retaining screws or clips securing the headlight assembly to the vehicle, then gently pull the assembly forward to detach it from the vehicle. Finally, replace the bulb if needed and reinstall the assembly in reverse order.