You have to remove the whole lower panel of the dash with either Alan or torch wrench.
Remove the 1993 Toyota decorative radio cover in. Remove the radio retaining screws. Pull the radio out. Remove the wiring harness.
* Remove the ashtray and ashtray holder * Remove the radio and mounting plate screws and lower the radio and unplug the electrical connector and antenna lead then push the radio out of the dashboard
im trying to find out the same thing
you will need to unscrew your dash and pull off the front plate of your dash, then you will need to unscrew the stock radio, then you will need to go ahead and pull out the adapter from the back of your radio.-Shocker
you will need to unscrew your dash and pull off the front plate of your dash, then you will need to unscrew the stock radio, then you will need to go ahead and pull out the adapter from the back of your radio. and that should do it-Shocker
To remove the stock radio from an Acura CL, first, disconnect the negative battery terminal to ensure safety. Then, carefully pry off the trim panel surrounding the radio using a trim removal tool to avoid damaging it. Once the trim is removed, unscrew the mounting screws holding the radio in place, then gently pull the radio out and disconnect the wiring harness and antenna cable from the back. Finally, remove the radio completely from the dashboard.
remove the exterior trim peace that surrounds the outer edges of the radio. Then there should be either two 10mm bolts or four phillip head screws holding the radio in place remove them and gently remove the radio from it slot and then unplug the wire harnesses and antenna in the back of the radio. repeat in reverse to reinstall.
first don't remove your stock stereo if u havn"t already. The radio works with the carscomputer to reset codes and other stuff. you can get an adapter that turns your speaker wire on the back of the radio into left and right channel to hook up to an aftermarket amplifier. then hook up your new speakers and sub woofer to the amp and use the stock radio to get your grove on. or install an after market radio in the glove box or middle console but don't remove the stock radio. get rid of the stock amp not powerful enough.
The ticker symbol for Delta Air Lines is DAL and it is traded on the New York Stock Exchange.
To remove the stock radio from a 1993 Toyota truck, first disconnect the negative battery terminal to ensure safety. Then, use a flathead screwdriver or a trim removal tool to carefully pry off the trim panel surrounding the radio. Once the panel is removed, unscrew the radio mounting screws and gently pull the radio out of the dash. Disconnect the wiring harness and antenna cable, and the radio will be fully removed.
To remove the stock radio from a 1994 Hyundai Excel, first, disconnect the negative battery terminal to ensure safety. Then, use a flathead screwdriver to gently pry off the trim panel surrounding the radio. Once the trim is removed, unscrew the mounting screws securing the radio in place, and carefully slide the radio out of the dashboard. Finally, disconnect the wiring harness and antenna cable from the back of the radio.
Remove ashtray by lifting up & out. You will see 2 Phillips head screws. Take them out. Remove ashtray bracket assembly. You will see 2 clips on the bottom of radio on both sides press both tabs down & pull out radio.