0
Blend Door Problem
Your problem sounds like the common blend door problem on the Ford Expeditions, and Ford Explorer. The door is on a vertical axis and when it breaks, it can swing back and forth randomly giving heat or AC or nothing. The difference on acceleration is the force placed on the door swinging it one direction.
You can check the operation by fully opening the glove box, removing the actuator motor on top of the plenum box and examining the blend door axle (the actuator is under the unit on top of the hump behind the flexible black plastic cover. It is on top of the unit, behind the glove box in the 2002 F-350 though). Pictures of the common fail signature are available on the Related Links below. There are several "free" fixes that mostly are worth what you pay for them. The solution on the web site is solid and proven over hundreds of vehicles and will resolve the problem once and for all.
What else can I help you with?
How much should it cost to replace blend door motor in a 1990 Chevy C1500?
well I'm having the same problem with my 2004 ford explorer and ford told me it will cost any where between 700.00 and 1800.00 dollars...
How do you replace 2004 ford explorer heater control door actuator control module?
Check heatertreater.net for diagnostic information and a fix for the blend door/actuator problems endemic to this model.
How do you replace the heater controls in a 2004 Ford Explorer?
IF the problem is with control over heat and AC, most likely the problem is with the blend door operation. It is a common failure on the 02-08 Explorer. Check heatertreater.net for diagnostics, pictures, and a repair solution.
How hard is it to replace the speakers on a 2004 Ford Explorer?
it is hard to replace the speaker because the ford explorer needs accessories manufactured by the same manufacturer
2004 explorer heater control?
how hard is it to replace the blending door
How do you replace head gasket in a 2004 Ford Explorer V-6?
cost to replace a head gasket
How do you replace motor mounts in 2004 dodge neon?
take it to the mecanic bye
How do you replace an AC Heater blend door unit on a 2004 Ford Freestar minivan?
Can't say for positive sure, but I would expect the Freestar/Monterey blend door actuator motor to be much like the Windstar. Common failure, easy replacement - about $40 See "Related Questions" below for links to the Windstar related blend door discussions
The heat in the front seat of your 2004 Ford Explorer is blowing cold air and makes a clicking sound in the dash board The cold air works fine and the heat in the back seat works fine?
These are classic symptoms of a failed blend door actuator motor.
How do you replace blower motor on 2004 Pontiac Bonneville?
To replace the blower motor on a 2004 Pontiac Bonneville, first disconnect the negative battery cable to ensure safety. Remove the passenger side lower dash panel and locate the blower motor housing. Unscrew the motor from its housing, disconnect the electrical connector, and then replace it with the new blower motor. Reassemble by reversing the steps and reconnect the battery.
2004 Ford Explorer heater problems clikcing noise?
It is either a broken blend door, or a broken actuator motor. Typically to fix this problem, a mechanic will disassemble the entire dash, and replace the plenum box. Unfortunately this is an expensive fix because it is labor and parts intensive. There is a DIY solution called heatertreater. They provide instructions on how to access the blend door by removing the glove box, and replacing the blend door without removing the dash and plenum assembly. Broken blend doors are a common problem among Ford explorers, and most heating and A/C issues in late model Ford explorers are directly caused by a malfunctioning blend door.
How do you replace the fan clutch in a 2004 vw passat?
how do you remove a fan clutch from a 2004 volkswagon passat 2.8 motor
