To replace the Power Steering pump on a 1989 Cadillac Brougham, first, disconnect the negative battery cable and drain the power steering fluid. Remove the drive belt and the mounting bolts of the old pump, then carefully detach the pump from the steering gear. Install the new pump by reversing the removal process, ensuring all connections are secure. Finally, refill the power steering fluid and check for leaks before reconnecting the battery.
It goes in the power steering located on the drivers side, in the front of the motor. There is a black screw cap on the power steering pump and a dipstick inside.
its probably the fuse for the cigg lighter. Check that right under the steering column. It should be marked.
fdgf
500.00
replace rack and pinion and power steering pump
Well, isn't that a happy little question! To install the power steering belt on your 89 Cadillac Brougham, start by locating the belt tensioner pulley. Use a wrench to rotate the tensioner, allowing you to slip the belt over the pulleys. Make sure the belt is sitting properly in all the grooves before starting your engine and enjoying a smooth ride down the creativity highway.
Power steering hose
Remove the plug on the bottom of the power steering fluid pump. Drain the power steering fluid out. Replace the plug to the bottom of the power steering pump. Replace the power steering fluid.
It's under the power steering pump . Power steering pump is behind the alternator.
What have to do replace the belts water pump power steering
power steering line adaptor assembley
In the power steering box. It is on the left side of the engine under the engine cover. It has a steering wheel on it.