0
Perhaps the question asker is referring to the ignition coil module that feeds to the distributor. This coil is mounted to the passenger side of the intake manifold with (2) 10 mm hex screws. Replacing this is a simple matter of unplugging the electrical connections, unbolting from the manifold and installing a new coil in the reverse procedure. Please note that the '99 suburbans still used the 5.7 liter, L31 RPO engine and are different from the pickup truck line which had already switched over to the new 6.0 engine line.
What else can I help you with?
How do you replace the ignition module on a 1999 gmc suburban?
To replace the ignition module on a 1999 GMC Suburban, first disconnect the negative battery cable to ensure safety. Remove the distributor cap and rotor to access the ignition module, which is typically mounted on the side of the distributor. Disconnect the electrical connectors and unbolt the module from the distributor. Finally, install the new module, reassemble the distributor, and reconnect the battery.
How do you replace a starter on a 1999 Chevy Suburban?
How do you replace a starter in a 1999 suburban
Where is the ignition module 1999 Laredo?
The engine computer is the ignition module.
How to replace the ignition module in a 1999 Ford Contour?
What engine? Ford contour 2.0L DOHC eng. distributorless ignition are controlled by the main PCM There is an ignition module on the 99 contour 2.0 with automatic transmission. It is shown in the schematics for this model.
Where is the ignition module on a 1999 4 cylinder Chevy S 10?
The 1999 Chevy S 10 pickup truck ignition module can be found on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.
How do you replace ignition lock 1999 vw beetle?
how to replace ignition lock for 1999 vw beetle
Where is the ignition module on a 1999 Chevy Astro van?
Right under the ignition cap.
Where is the Retained Accessory Power Module located at on a 1999 Chevy Suburban?
There is none!
Where is the ignition module located on a 1999 Mercury villager?
Inside the distributor
How do you install ignition control module on 1999 vw passat turbo?
Pull the cover off the air intake box, unclip the two wires from the old module, remove screws. Screw in new module and replace wores and box. job done
Where is the ignition control module on a 1999 Ford Crown Vic?
The Ignition control module is mounted under the hood. It is on the fire wall right beside the hood strut,
Where is the ignition module located on a 1999 Plymouth Breeze?
It is part of the engine computer.
