Open the hatchback and locate the trim plate inside the hatchback. Pry it off with a thin plastic tool such as a putty knife to gain access to the lamps.
Remove the two 10 millimeter screws and pull the housing down and replace the bulb
twist rubber housing a quarter turn pull out replace with new bulb
To replace the license plate bulb on a 2003 Chevy Tracker, first, locate the license plate light assembly at the rear of the vehicle. Use a flathead screwdriver to gently pry off the lens cover. Remove the old bulb by twisting it counterclockwise and then replace it with a new bulb, ensuring it’s secure. Finally, snap the lens cover back into place and test the new bulb to ensure it works.
there should be little screws that you screw out and they pop out and you twist the bulb to remove it
What fuse number is the License Plate on a 2003 Ford Winstar Van LX
Remove the screws that hold the covers in place. Replace bulbs!
Remove screws, remove light assembly, rotate bulb holder counterclockwise & pull out, replace bulb(# 194). Installation is reverse.....
Check bulbs
How do you replace the light bulb over the number plate in a 2002/2004 Buick LeSabre ? Thanks, Henry Aubut - 19460 Bermuda court, no. fort Myers, fl (239) 731-0710 Henry.aubut@Verizon.net
Because this bulb is mounted vertically, it can be tricky. The recommended method is to remove the license plate and open the trunk lid.
The license plate lights are not in a separate fuce by it seft. They are the same as your side marker lights. So, check if your side marker lights are working and if they are them is a bad license plate light bulb.
You will have to replace the regulator assembly.