answersLogoWhite

0

To replace the rear strut on a 2002 Mercury Sable GS, first, safely lift and support the vehicle using jack stands. Remove the rear wheel, then detach the strut from the lower control arm and the top mount inside the trunk by removing the nuts. Install the new strut by reversing the removal process, ensuring all bolts are tightened to the manufacturer's specifications. Finally, reattach the wheel and lower the vehicle, checking for proper alignment.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

How do you change rear strut on a 2002 Hyundai XG350?

To change the rear strut on a 2002 Hyundai XG350, start by safely lifting the vehicle and securing it on jack stands. Remove the rear wheel, then disconnect the lower strut bolt and the upper strut mount bolts inside the trunk. After detaching the strut assembly, replace it with the new strut, reattach the upper and lower bolts, and finally, reinstall the wheel. Always ensure the suspension is properly aligned after completing the replacement.


Does 2002 Buick Rendezvous have shocks or struts on rear?

YES A Rendezvous does has a shock and a strut on the rear.


Is it necessary to compress spring coil to replace rear strut?

Normally, yes.


How do you change 2002 Hyundai Santa Fe rear shocks?

Be sure to consult a manual before attempting any car repair. Locate the struts directly in front of the rear wheel well. Follow the brake hose from the wheel hub, and pull the strut assembly out of the bottom of the car. Disassemble the strut assembly, and replace the shocks and any other places showing wear. Reassemble the strut and replace it in the car.


If 1 is strut leaking do you replace both?

Yes, most definitely. You must always replace struts and shocks in pairs. Replace one front shock or strut then you must replace both. Same for the rear.


How do you replace rear strut on a 2013 Impala?

To replace the rear strut on a 2013 Chevy Impala, first, safely lift the rear of the vehicle and support it with jack stands. Remove the rear wheels, then unbolt the strut from the lower control arm and the upper mount inside the trunk. Replace the old strut with the new one, ensuring all bolts are torqued to specifications, and then reassemble by putting the wheels back on and lowering the vehicle. Always check for proper alignment and test drive to ensure everything is functioning correctly.


How do you replace rear shocks on 92 Toyota tercel?

remove the rear wheel, undo the bottom bolt of the strut. inside the car remove the plasic paneling in the back covering the strut mount. unscrew both nuts and pull the strut out.


How hard is it to replace the rear springs on a 2001 Mercury Sable if they are replaced with Quick Struts?

Using Quick-struts - the strut and coil spring already assembled - makes the job a whole lot easier! See "Related Questions" below for more


How do you remove the rear strut on a 2002 ford taurus?

Unbolt the old one at top under panel in trunk, and at bottom of suspension. Remove out the top of rear A frame. Replace same way. Easy, I just recently did both in about an hour.


How hard is it to replace the rear struts on a Saturn 2002 L200?

how to replace rear struts on a 2002 saturn L 300


When you drive through a dip or over a bump in the road the rear end of your 95 Chevy lumina bounces horribly Do you need new springs or new struts?

If it uses rear struts, replace them. If it's rear shocks, replace them. Basically it's the same thing. Replace the strut inserts if you can get them. It's a lot less money than replacing the entire strut.


Where are the strut mounting nuts located on a 2000 Taurus - Sable?

Front or rear struts?I would assume the rears as there are a number of folks searching for those mountings - in contrast no one seems to ever ask about the fronts.Good coverage (okay, I'll take that pun) of the rear strut mountings in the "Related Question" below.