0
Cable run from back side of shifter to the tranny. The center console will have to be taken out, its easy to remove. Cable snaps into the bottom of the shifter mechanism. Hooks to the tranny with a shim type clamp. Located on drivers side below the break master cylinder. You will need to remove the intake hose from the throttle body to the air box. To include the airbox and filter. The cable has grommets that keep it secure and keep water and air out of the cars interior. You can email me at stewblank6669 at Yahoo, I can give you my number if you need to hear this explained. I work on these things. Butch
What else can I help you with?
How do you fix a sloppy gear shift on a 1998 ford explorer?
Replace shift linkage Replace shift linkage
How do you replace the wiper linkage on a 1998 Nissan altima?
Below
Why is your 1998 Nissan Sentra with automatic transmission shifter not shifting out of park?
The shifter linkage might be jammed or disconnected. The shifting sensor, that detects if the brake is engaged, may be malfunctioning.
How do you change shifter linkage 1998 automatic cavalier?
To change the shift linkage in an 1998 automatic Chevy Cavalier the shift linkage needs to be removed from the transmission and pulled from the cabin. The job requires removing the floor console to access the cable. After doing the so the cable can be snaked from inside the cabin, the install is the reverse of the removal.
How do you change the shifter cable on a 1998 oldsmbile silhouette?
To change the shifter cable on a 1998 Oldsmobile Silhouette, first you need to disconnect the cable from the shifter, then disconnect it from the engine's control arm. Then replace it with the new cable and make sure it is functioning.
Why does my 1998 Corolla sometimes fly out of 5th gear into neutral when driving at interstate speed and Is there an adjustment on the shift linkage to correct this?
you have trouble in the gear box.. there is no linkage adjustment
How do you replace shift cable on 1998 Oldsmobile silhouette?
To replace the shift cable on a 1998 Oldsmobile Silhouette, first, disconnect the negative battery terminal for safety. Then, remove the center console to access the shift cable, detaching it from the shifter and the transmission linkage. Install the new shift cable by reversing the removal steps, ensuring it is properly secured and connected. Finally, reassemble the center console and reconnect the battery.
How do you replace the throttle cable to the gas pedal on a 1998 Honda Accord V6 3.0 Vtec engine?
The 1998 Honda Accord 3.0 liter engine does not have throttle cable. The automobile has throttle linkage. The linkage is connected at each end with a connecting bolt. Remove the connecting bolt to remove the linkage.
How do you replace shifter cable on 1998 Pontiac transport van?
To replace the shifter cable on a 1998 Pontiac Transport van, first, disconnect the negative battery terminal to ensure safety. Then, remove the center console by taking out any screws and clips, which will give you access to the shifter mechanism. Detach the old cable by unhooking it from the shifter and transmission, and then install the new cable by reversing the removal process. Finally, reassemble the center console and reconnect the battery.
How do you adjust linkage 1998 dodge ram 1500?
Which linkage.
Remove and replace the shifter shaft sportster 1998 harley Davidson?
good instructions in the manual. I just removed mine to have it welded.
How do you change the shifter assembly in a 1998 Chevy silverado?
First you have to remove the plastic around the steering column, two bolts hold on the lower plastic and two screws hold on the upper plastic from under the steering column once the plastic is removed you can access the three bolts holding the shifter assembly in place. You must first remove the transmission linkage As well as the selector linkage in order to get it free
