You need to test/replace the knock sensor. ireplaced it already.
No, the range sensor reads what gear or "range" you have shifted into.A speed sensor reads the speed of an item.No, the range sensor reads what gear or "range" you have shifted into.A speed sensor reads the speed of an item.
the map sensor is located on top the intake manifold and reads off map sensor just disconnect wire then get a Philips screw driver and take off then replace and put back on
No. The crank sensor reads the crankshaft location and speed. The cam sensor reads the camshaft.
It is easier and cheaper to replace the temperature sensor--try that first
the sensor reads where the remote is in relation to the sensor and reads what way the remote moves (up, down, left, right) the wii reads this info as if it were a button on a gamepad
It is a sensor on the transmission that reads the rotational speed of the input shaft.It is a sensor on the transmission that reads the rotational speed of the input shaft.
Its in the key switch
No, the crank sensor reads crankshaft speed. The cam sensor reads camshaft speed. The cam sensor is on the distributor on a 1999 2.5L
check/replace the engine coolant level sensor located in the engine coolant overflow reservior (located at the rear of the engine compartment pass. side)
your car has a speed sensor located on the transmission replace that and problem is solved
The oxygen sensor reads the amount of oxygen in your exhaust to calibrate your air/fuel mixture. If it reads a higher voltage, the sensor is telling the pcm that you are running rich. Your sensor could be bad or need cleaning. Start with the inspection of the oxygen sensor for carbon deposits and the wire for any pinch or melting. Since it is a 97 you probably need to replace it anyways.