Oh, dude, replacing the turn signal lever on a 1979 Chevrolet Malibu is like a walk in the park... if that park is full of confusing wires and tiny screws. You basically gotta remove the steering column cover, locate the lever assembly, disconnect it, swap it out with a new one, and then put everything back together. It's like a puzzle, but with more grease and frustration.
replace the steering column.
First thing it is a lever. It is underneath the trunk release button.
check cable under seat to see if it is ok! the one going to seat lever. if nessesary replace cable.
To change the shift lever console light bulb in a 2003 Chevrolet Malibu, first, disconnect the negative battery terminal for safety. Then, remove the trim panel around the shift lever by gently prying it off with a flat tool. Once the panel is removed, locate the light bulb socket, twist it counterclockwise to remove it, and replace the old bulb with a new one. Reassemble the trim panel and reconnect the battery terminal to complete the process.
Pull turn signal lever?
nevermind
Multifunction lever at the left side of steering wheel?
lever pulled out, having trouble getting the lever locked back in place
If your car has a tilt wheel it is operated by a short lever below the turn signal. Pull back on the lever to tilt the wheel.
The turn signal lever is the dimmer switch. You either pull it back or push it in. but also the dimmer switch its self is in the steering column u have to take the steering wheel off to replace
i popped out the trip lever and used a stiff paper clip to get it over the stop pin.
how to replace high/low beam, turn signal lever on 1996 subaru outback wagon