To replace the turn signal switch on a Pontiac Transport van, first disconnect the negative battery cable to ensure safety. Remove the steering column covers by unscrewing the screws, then detach the wiring harness connected to the old turn signal switch. Unscrew the switch from the column, replace it with the new switch, reattach the wiring harness, and finally reassemble the steering column covers before reconnecting the battery. Test the turn signals to ensure proper functionality.
By taking it to a GM certified auto technician.
To replace a turn signal switch on a 2003 Pontiac Aztek, also known as a flash relay, the steering column must be removed. The flash relay is located under the turn signal. Remove the mounting hardware and the unit can be taken off.
On my 2001 it is part of the Hazard switch. You have to replace the entire switch on a 2001.
My turn signal switch died on my 92 Grand Prix. Rather than attempting the repair, I took it to a shop. The steering column had to be removed to get to the switch.
Pulling the turn signal switch toward you should switch the lights to the low beams. If that doesn't work, you may have to replace the switch, which means replacing the entire turn signal stalk.
To change the key switch in a 1993 Pontiac Transport, first disconnect the negative battery cable to ensure safety. Remove the steering column cover by loosening the screws, then locate the ignition switch. Disconnect the wiring harness and remove the mounting screws to replace the switch. Reassemble everything and reconnect the battery.
The turn signal switch is quite easy to remove and replace. The turn signal switch simply plugs in and plugs out.
The 1995 Pontiac Transport air conditioning relay switch can be found in the fuse box. The air conditioning relay switch will be at the top of the third column.
The 1991 Pontiac turn signal flasher relay switch can be found beneath the drivers side dashboard. The turn signal flasher relay switch will be above the gas pedal.
Low beam bulb burnt out? Replace bulb. Bulbs OK? If the dimmer switch is also the turn signal/cruise/headlight on and off switch, you probably have to replace the entire switch.
under the dash
To replace the turn signal switch on a 2007 Pontiac Grand Prix, start by disconnecting the negative battery cable to ensure safety. Remove the steering wheel by taking out the retaining bolts, then detach the airbag assembly if applicable. Once the steering wheel is off, access the turn signal switch by unscrewing it from its housing, disconnect the wiring harness, and install the new switch by reversing the process. Reassemble the steering wheel and airbag, reconnect the battery, and test the turn signals to ensure proper functionality.