2 screws.
The coil is located in the top part of the distbutor cap
to the left of cap wiring plug ins one space.
if the coil is on the distributor cap,remove cover then disconnect wires from the coil and remove coil. if coil is on engine then loosen the bolt and remove from coil mount
I believe that goes to the center of the distributor cap
Since the coil is in the distributor, simply hook the tach 'trigger' wire to the out put on the side of the distributor cap marked 'tach'.
u have to look at ur distributor if it is an HEI "coil on top there is markings on the distributor cap for the tach but if it is a regular distributor with an external coil you hook it up to the neg wire off the coil neg/ black wire
there is no such thing as an exhaust coil. the ignition coil is the cylinder shaped thing that has a spark plug wire running to the center of the distributor cap
Ignition coil is bad, is it right on top of the cap maybe a bad wire in the wirng harness or bad connector.
The ignition coil is inside the distributor behind the cap. Remove the distributor cap screws, remove the cap and you will see the coil.
Where all the wires plug into. That is the ignition coil. The ignition coil is inside the distributor behind the cap. Remove the distributor cap screws, remove the cap and you will see the coil.
Failed coil wire, failed rotor, failed capFailed coil wire, failed rotor, failed cap
NO