0
What else can I help you with?
How do you replace a camshaft sensor on a 1999 Tahoe?
The cam shaft position sensor is located under the distributor cap. You can replace this easily by undoing the screws holding on the distributor cap, remove and replace the sensor, then just replace the distributor cap.
What is the cost of a replacing a distributor cap on a Pontiac sunfire?
What it will cost you to replace the distributor cap on a Pontiac Sunfire will vary depending on if you do it yourself or if you take it to a garage. The cost can be over $100 if you take your car to a garage.
How do you replace distributor cap for 1993 buick century?
it is distributorless no cap to replace has coil packs
How do you replace ignition coils 2001 ford f150?
take off the distributor cap see what you find.
How do you replace the distributor cap and rotor on a 1998 Toyota RAV4?
there is no distributor on a 98 rav. therefore no cap or rotor. replace the plugs and wires and the tuneup is done
Distributor cap removal for 97 Chevy cavalier 2.2L?
how do you remove and replace the distributor cap on a 97 chevy cavalier?. I can not get to it.
How do you replace rotor and distributor 92 caprice?
To replace the rotor and distributor cap on a 1992 Caprice, first disconnect the battery to ensure safety. Remove the distributor cap by unscrewing any retaining screws or unclipping it from the distributor. Next, take off the rotor by unscrewing it from the distributor shaft. Install the new rotor and cap, ensuring they are securely fastened, then reconnect the battery and start the engine to verify proper installation.
How do you replace a distributor rotor of Ford Festiva?
To replace the distributor rotor on a Ford Festiva, first ensure the engine is off and disconnect the battery. Remove the distributor cap by unscrewing the clips or screws, then carefully lift it off to expose the rotor. Take note of the rotor's orientation, unscrew it from the distributor shaft, and replace it with the new rotor in the same position. Finally, reattach the distributor cap, ensuring it is secure, and reconnect the battery.
How do you replace the distributor cap on s Mitsubishi diamante?
To replace the distributor cap on a Mitsubishi Diamante, first, ensure the engine is off and cool. Disconnect the negative battery terminal for safety. Remove the screws or clips holding the distributor cap in place, then carefully detach the cap from the distributor. Install the new cap by aligning it properly, securing it with screws or clips, and reconnecting the battery terminal.
How do you install distributor cap if the screws are bad?
Replace the screws.
Where is the distributor cap on a dodge dakota?
The distributor cap is to the rear of the engine behind the air intake. To replace it, I recommend moving the air intake out of the way.
How do you replace the distributor cap on a 1996 Chevy Astro van?
Remove the center console/cupholder. Remove the interior doghouse. Remove distributor cap.
