there is no distributor on a 98 rav. therefore no cap or rotor. replace the plugs and wires and the tuneup is done
To replace the distributor rotor on a Ford Festiva, first ensure the engine is off and disconnect the battery. Remove the distributor cap by unscrewing the clips or screws, then carefully lift it off to expose the rotor. Take note of the rotor's orientation, unscrew it from the distributor shaft, and replace it with the new rotor in the same position. Finally, reattach the distributor cap, ensuring it is secure, and reconnect the battery.
To replace the rotor and distributor cap on a 1992 Caprice, first disconnect the battery to ensure safety. Remove the distributor cap by unscrewing any retaining screws or unclipping it from the distributor. Next, take off the rotor by unscrewing it from the distributor shaft. Install the new rotor and cap, ensuring they are securely fastened, then reconnect the battery and start the engine to verify proper installation.
Doesn't have em
It's the distributor rotor that you are looking for & it's under the distributor cap. Remove the distributor cap and there you will find the rotor.
# Unplug the distributor connector from wiring harness connector # Loosen the distributor cap retaining screws # Label and disconnect the spark plug cables from the distributor cap # Lift the cap off of the distributor # Note in which direction the distributor spark pick-up is pointing then pull the rotor off of the distributor shaft
yes ther is.
Replace the spark plug wires, distributor cap and rotor.
If the distributor shaft has side to side play it is probably worn out. If the shaft has no play just replace the cap and rotor.
Changing the distributor cap and rotor on a 1994 Camry 4dr sedan requires removing the cap screws, lifting off the cap, unscrewing the rotor, and replacing both parts.
To change the distributor cap and rotor on a 1997 Chevy pickup, first, disconnect the negative battery terminal for safety. Remove the screws or clips holding the distributor cap in place and carefully lift it off, noting the wire connections for reassembly. Next, take out the rotor from the top of the distributor by unscrewing or lifting it off, then replace it with the new rotor. Finally, install the new distributor cap, reconnect the wires as they were, and reattach the battery terminal.
replace the plugs,wires,distributor cap,rotor and air filter.