Replacing the transmission on a 2000 Dodge 4WD truck typically takes about 8 to 12 hours, depending on the technician's experience and the specific vehicle model. Factors such as access to tools, the condition of surrounding components, and whether any additional repairs are needed can also affect the timeline. If the work is being done in a shop, it could take a day or two due to scheduling and parts availability.
Take down the transmission oil pan, remove the transmission filter if needed. Replace solenoid. Replace all and refill transmission
The transmission solenoids are inside the transmission, on the valve body.
Only you swap the overdrive/tailshaft unit.
If the truck is a 4 wheel drive it would be easier to remove the engine to replace the flywheel. If the truck is a 2 wheel drive removing the transmission and bell housing is the way to go.
how to remove and replace transmission fluid pressure switch on a 2002 dodge ram 1500
Truck, no. Car or minivan, yes.
Remove the engine and drive shaft
What type of transmission fluid do I put into a 2001 ram 1500 four-wheel-drive drive automatic truck
Yes, i guess they did there is a transmission on craigslist right now for that truck. I am not sure if it is for wheel drive or rear wheel.
If both are the same size truck ( ie 1500 ), have the same engine, and the same drive ( 2wd or 4wd ), then it should.If both are the same size truck ( ie 1500 ), have the same engine, and the same drive ( 2wd or 4wd ), then it should.
No.
You need a different front end, transmission, transfer case, wiring, etc. Buy a different truck.