In 2009, a total of 1,265 Pontiac Solstice Coupes were produced with the 2.4L engine. The 2.4L engine was one of the two engine options available for the Solstice Coupe, the other being a more powerful turbocharged 2.0L engine. Production of the Solstice model ended in 2009, making these vehicles relatively rare.
I have a 2006 Pontiac Solstice. I disconnected the battery terminal for about 45 minutes. When I reconnected it the light stayed off. Good luck
The 2006 Pontiac Solstice is equipped with a 2.4-liter four-cylinder engine that produces 177 horsepower. Additionally, there is a turbocharged 2.0-liter engine option available in later models, which generates 260 horsepower. The standard engine provides a sporty driving experience, characteristic of the Solstice's design.
Springhill Tn. At the former Saturn plant, about 45 miles south of Nashville
The Pontiac Solstice GXP is a high-performance variant of the regular Solstice. While the standard Solstice is powered by a naturally aspirated 2.4-liter four-cylinder engine, the GXP features a turbocharged 2.0-liter four-cylinder engine, producing significantly more horsepower and torque. Additionally, the GXP includes sportier suspension, upgraded brakes, and distinctive styling elements, enhancing its overall performance and handling.
The 2007 Pontiac Solstice is equipped with a 2.4-liter four-cylinder engine that produces 173 horsepower, allowing it to accelerate from 0 to 60 mph in approximately 6.5 seconds. The top speed of the Solstice is around 125 mph. Overall, it offers a sporty driving experience with responsive handling and performance.
The Pontiac Solstice is equipped with a timing chain rather than a timing belt. Timing chains are generally more durable and require less maintenance compared to timing belts. This design choice contributes to the engine's longevity and reliability.
To reset the computer in a 2008 Pontiac Solstice, you can start by disconnecting the negative battery cable for about 10-15 minutes. This will clear the stored error codes and reset the engine control module. After reconnecting the cable, turn the ignition to the "On" position without starting the engine for a few seconds, then start the car. This process should help reset the computer.
On a 2007 Pontiac Solstice, the oil filter is located on the underside of the engine, near the oil pan. It can be accessed from beneath the vehicle, typically on the driver's side. Make sure to use caution and possibly lift the car with jack stands for better access when changing the oil filter.
To reset the change oil light on a Pontiac Solstice, first, turn the ignition key to the "ON" position without starting the engine. Then, press the accelerator pedal three times within five seconds. Finally, turn the ignition off and then back on to check if the light has reset. If it remains illuminated, repeat the process.
To remove the hardtop from a 2001 Frontera Sport, start by ensuring the vehicle is parked on a flat surface and the engine is off. Disconnect any wiring connected to the hardtop, then locate and remove the bolts or screws securing the hardtop to the vehicle. With assistance, lift the hardtop straight up and off the frame, taking care to avoid damaging the vehicle or the hardtop itself. Store the hardtop in a safe place to prevent scratches or dents.
You can tell if a Pontiac Solstice is overheating by checking the temperature gauge on the dashboard; if the needle moves into the red zone, it's a sign of overheating. Additionally, you might notice steam coming from the engine bay or a burning smell, which indicates excessive heat. Warning lights may also illuminate on the dashboard, signaling a temperature problem. If any of these signs occur, it's important to pull over safely and check the coolant levels and engine condition.
To reset the oil change light on a Pontiac Solstice, turn the ignition key to the "On" position without starting the engine. Then, press the gas pedal three times within five seconds. After doing this, the oil change light should reset and turn off. If it doesn’t reset, repeat the process or consult the owner’s manual for further instructions.