I've got the same issues there is four shifting solenoids
i have a 98 Mazda b3000 auto 4x4. where are the shift solenoids located
A 98 Blazer S10 has 5 lugs on each wheel.
One
No
that will most likely be your problem. the solenoids are telling the computer not o let the transmission basically shift into gear. just like if it was to skip gears. hope this answers your question. with regards, ed
Yes, the doors from a 98 Chevy Blazer will fit a 2001 Chevy Blazer with a little moderation.
how to in stall a Quarter Window in a 98 Chevy blazer
Yes.
Can you interchange doors from a 98 s10 blazer with a 98 s 10 pick up
No you can not. The 98 computer is not programed to shift the 89 transmission. Besides that your wiring harness on the 98 will not hook up to the 89 trans. You need to go back with the factory 4L80E trans. That belongs in the 98.
where the map sensor on 98 blazer?
TCC is not a sensor. It is a function controlled by the PCM using a solenoid. There is no such thing as a TCC sensor. There is no such thing as a tcc solenoid.There are two solenoids, an on/off solenoid and a shift solenoid, that is located inside the transmission on the valve body assembly. It is necessary to access the valve body inside the transmission to replace the solenoids.