A 1997 Chevrolet K1500 typically has a transfer case that holds about 2 to 3 quarts of fluid, depending on the specific transfer case model (e.g., NP transfer cases). It's important to check the owner's manual or service manual for the exact specifications and recommended fluid type for your particular vehicle model. Always ensure the transfer case is filled to the proper level for optimal performance.
11.2 quarts
The 1999 Ford Expedition owners manual shows : 1.9 liters ( 2.0 quarts - U.S. ) of Motorcraft MERCON automatic transmission fluid in the transfer case
one and a half liters or until fluid starts coming out of the filler hole.
The amount of oil required for a transfer case varies by vehicle make and model, but most transfer cases typically hold between 1 to 3 quarts of fluid. It's essential to consult your vehicle's owner’s manual for the specific capacity and the type of fluid recommended. Additionally, checking the fluid level periodically and changing it according to the manufacturer's maintenance schedule is crucial for optimal performance.
The trans will need almost 12 quarts The transfer case will hold almost 2 quarts
The fluid capacity of a Dodge 2500 transfer case typically ranges from about 2 to 3 quarts, depending on the specific model and year. It's important to refer to the owner's manual for the exact specifications for your vehicle, as variations can occur. Always use the recommended type of fluid for optimal performance.
If the intire system is dry, It will hold 1qt. and a 1/2
A 208 transfer case typically holds about 2 to 2.5 quarts of transmission fluid. However, it's essential to consult the vehicle's owner manual or service documentation for the exact capacity, as it can vary slightly depending on the specific model and year. Always check the fluid level after filling to ensure it's at the proper level.
two qt.
4.5 quarts
You should use Dexron III Automatic Transmission Fluid or GM Auto-Trak II fluid which are recommended by the manufacturer. All Chevy Blazers through 1998 will hold 1.25qts.
6 bolts hold the transmission to the back of the engine.