0
What else can I help you with?
Do you have to take out the engine to fix a radiator hose in Chrysler lebaron?
No, you do not have to remove the engine to replace a radiator hose.No, you do not have to remove the engine to replace a radiator hose.
How do you change lower radiator hose 1996 Chevy truck with 454 engine?
only way to change lower radiator hose is to get underneath the vehicle there is a fawcet on bottom of radiator to dump coolant, then remove hose from underneath vehicle
How do you change your thermostat?
\ follow top radiator hose to engine on most cars
How do you the change radiator hose behind engine in Daewoo Matiz?
To change the radiator hose behind the engine in a Daewoo Matiz, first, ensure the engine is cool and drain the coolant from the radiator. Then, access the hose by removing any necessary components that may obstruct it. Disconnect the old hose by loosening the clamps at both ends, replace it with a new hose, and secure it with the clamps. Finally, refill the coolant and check for leaks before starting the engine.
How do you change radiator hose on 95 Cadillac Seville sls?
To change the radiator hose on a 1995 Cadillac Seville SLS, first ensure the engine is cool and disconnect the negative battery terminal. Drain the coolant from the radiator, then loosen the hose clamps on both ends of the old hose and remove it. Install the new hose by securing it to the radiator and engine, tightening the clamps, and refill the coolant before reconnecting the battery. Finally, start the engine and check for leaks.
How do you change a thermostat on an Aurora?
unhook the lower radiator hose from the engine, and there it is... you just pull it out, put the new one in, hook your radiator hose back in and your done.
How do you change bottom radiator hose on 1987 Toyota 1 Ton pickup?
To change the bottom radiator hose on a 1987 Toyota 1 Ton pickup, first ensure the engine is cool and then drain the coolant from the radiator by opening the drain valve. Loosen the hose clamps at both ends of the bottom radiator hose and remove the old hose. Install the new hose by securing it with the clamps, then refill the radiator with coolant and check for leaks. Finally, run the engine to ensure proper circulation and check the hose connections again.
How do you you change antifreeze on a Pontiac Grand Am 92?
1. Open the radiator cap. 2. Disconnect the top radiator hose. 3. Run the engine for a couple of minutes with the hose off. 4. Insert tap water hose into the radiator where the top hose should be. 5. Run water into the radiator until clear water comes out of the radiator top hose. 6. Continue idling the engine, remove the tap water hose from the radiator, shut off engine as soon as the water stops coming out of the top water hose of the radiator. 7. Reconnect top water hose and fill radiator with antifreeze. Start engine and top off antifreeze.
Which radiator hose goes to the engine?
In most cases the lower radiator hose feeds the water pump. The upper radiator hose feeds the radiator.
Where is the thermostat on your dodge 5.9?
Under where the upper radiator hose hooks to the engine.Under where the upper radiator hose hooks to the engine.
Where is the thermostat on a Jeep 4.0 engine?
It is under the housing on the engine that the upper radiator hose hooks to.It is under the housing on the engine that the upper radiator hose hooks to.
How do you change a radiator hose on a vauxhall astra 1997?
To change a radiator hose on a 1997 Vauxhall Astra, first, ensure the engine is cool and disconnect the negative battery terminal. Clamp off the hose using pliers or a hose clamp tool, then loosen the clamps at both ends of the hose and remove it. Install the new hose by securing it to the radiator and engine, tightening the clamps to ensure a snug fit. Finally, refill the cooling system with coolant and check for leaks before starting the engine.
