0
To change the serpentine belt on a 1987 Buick LeSabre, first, ensure the engine is off and cool. Locate the belt tensioner and use a wrench to relieve tension on the belt, then remove the old belt from the pulleys. Route the new serpentine belt according to the belt routing diagram typically found under the hood. Finally, release the tensioner to secure the new belt in place, and double-check that it's properly aligned on all pulleys before starting the engine.
What else can I help you with?
What causes the serpentine belt to break on a 1987 Buick LeSabre?
Old age Frozen or misaligned pulley
Where is the thermostat on a 1987 Buick LeSabre?
Where is the thermostat located on a 1987 Buick LeSabre?
Where is the bolt to change the starter out of a 1987 Buick LeSabre 3.8?
There are 2 bolts that hold it to the rear of the engine.
Where is the relay located in a 1987 buick lesabre limited?
where is the relay located on a 87 lesabre
Where is the voltage regulator on a 1987 buick lesabre?
inside of the alternator
How big is the gas tank on a 1987 buick lesabre?
I have a 1990 lesabre and im 90% sure its a 16 gal.
How to fix an Antifreeze leak in 1987 Buick leSabre?
depends where the leak is, and how bad it is.
How do you fix a fuel injector on a 1987 buick lesabre?
no fix,replace with new only.
Where can you find a fuse box diagram for a 1987 Buick Lesabre?
autozone.com has alot of helpful info
How do you change the flywheel and starter of a 1987 Buick LeSabre?
Get a manual on your car from the parts store or from AUTOBOOKSONLINE.COM. This is not a job for the backyard mechanic as you have to hold the engine while the trans is pulled.
How do you open an 87 Buick LeSabre with a slim Jim?
The lock assembly is located in the center of the door panel of 1987 Buick LeSabre. Use of a Slim Jim is only legal for locksmiths and law enforcement officers.
Where is the fuel relay located on a 1987 Buick LeSabre?
It is with all of the relays in the center of the firewall under the hood.
