0
There's a drain plug on the bottom passenger side of the radiator. Unscrew it and the coolant will drain.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Where is the radiator drain plug on a 1995 ford ranger?
looking at the motor, its on the right side of the radiator at the bottom
Where is the differential plug on a 1993 ford ranger xlt?
there is no drain plug, you have to remove the whole cover to drain fluid.
How do you drain the radiator of a 1993 Ford Escort?
There is a threaded plug at the base of the radiator. Screw it out CC and take the cap off of the radiator.
How do you drain the radiator on a 1992 Ford Ranger?
take off your lower radiator hose and watch out! make sure you have a drain pan to catch your mess our there should also be a drain plug on the bottom drivers side to drain it out.
Where is radiator drain plug on 2003 ford ranger?
On the lower reservoir of the radiator. You should be able to see it looking from under the hood on the driver's side.
Can you use a transmission from a 1993 Ford Ranger to a 2000 ranger?
can you use a transmission from a 1993 ford ranger in a 2000 ford ranger?
2000 Ford Ranger V6 3.0 Where is the drain plug for the water jacket?
On the older 4.0L Ford there is a plastic shroud directly under the radiator. Remove it (not hard) and you should find the drain petcock. It is easy to spot and is on the passenger side of the radiator.
How to drain radiator in 99 Ford Expedition?
To drain the radiator on a 1999 Ford Expedition, place a bucket under the radiator. Unscrew the radiator drain hose or valve on the bottom of the radiator. Remove the radiator cap.
Need to drain the engine coolant where are the engine plugs on a 1990 ford Ranger?
You drain coolant from the radiator. but according to the book ther are two plugs on the engine block that need to drain the coolant from.
How do you change a 1993 Ford Ranger clutch?
how to i change a clutch in a 1993 ford ranger
Radiator flush Ford Ranger 1997?
The radiator drain is located under the radiator (you may have to raise your vehicle to spot it beyond the shield). (1)Remove radiator cap and attach a 3/8" diameter hose to the drain fitting to direct the coolant into a container and then open the drain fitting with a pair of pliers. (2)Flush radiator with fresh water from a garden hose until water runs clear through the plug. (3)Refill with 50/50 mixture of water and antifreeze. Piece of cake, huh!! The hardest part is locating the drain fitting which appears to be well hidden, but I think it is on the driver's side of the radiator. Good luck. By the way, intructions are from Haynes Repair Manual Ford Ranger 1993 - 2005.
How do you change themostat in a 1993 Ford Ranger?
Follow the upper Radiator house to the thermostat housing, there's 3 bolts holding it on. Take off the housing, remove the old thermostat, put in the new one and replace the housing. Make sure you drain the radiator first.
