0
pry out spring somehow (screwdriver or improvise) put spring in a vice on workbench and start tightening vise > put zip ties around a few coils and and tighen. pull out of vice < shove back in door and clip zip ties with side cuts. pop it goes back in.
Or you could purchase the tool from your local auto parts store for under $20.
What else can I help you with?
Why does the button on the door handle fall in on a 92 Chevy G20 van?
The spring holding the door button in place has fallen out. Remove the door handle and replace.
How do you remove the spring on a door in a Chevy S-10 Blazer?
To remove and replace that spring without doing harm to the vehicle or yourself you can purchase a simple tool from your local auto parts store for less than $10 that will do just that.
How do replace the door spring on a 2003 Chevy s 10?
Your local auto parts store can sell you an inexpensive tool to remove and replace that door detente spring. Other hinge parts such as the pin and roller for the door detente and hinge pins and bushings are also available.
How do you replace the drivers side mirror without taking off the inner door panel for a 2002 Chevy venture?
how i do replace the drivers side mirror for a 2002 Chevy venture with taking off the inner door panel
How do you put spring back on interior door handle of 98 Chevy pickup?
how do you install spring on interior door handle of a 98 chevy pickup
How do you replace a broken garage door spring?
To replace a broken garage door spring, you first need to determine the type of spring used; either torsion or side-mounted. To determine the type of spring, and then to replace the spring, there is a very good website that has all of the information available to replace and adjust the door springs. The website is at http://www.naturalhandyman.com/iip/infgar/infgar1b.html.
How do you compress a spring on 96 Chevy blazer door?
Your local auto parts store will sell you an inexpensive tool that will remove and replace that spring easily. It should cost less than $20.
My 2001 Chevy Blazer driver door hinge is very worn and I would like to replace it. The wear is beyond the bushings the holes are oblong now. I don't see fasteners. Are they welded to the body?
Hi What you have are worn bushings on your door pins . I just replaced mine. You can purchase the bushings at a any gm garage the spring in the door has to be removed it is a bugger! Unless you have a door spring commpression tool (i purchesed one at my local auto parts store $18). These bushings wear and crack. Support your door , remove door pins with a pin punch, replace the bushings, replace pins ,replace spring. Hope this helped!
How do you replace a 1998 cheyenne inside door handle?
how do I replace the inside door handle on a 1998 chevy cheyenne?
Services?
Garage Door Repairs, Garage Door Spring Repair, Automatic Garage Door Repair, Repair Garage Door Opener, How To Replace A Garage Door Panel, Garage Door Torsion Spring Repair, Garage Door Torsion Spring Replacement, Replacing Garage Door Cable, Emergency Garage Door Service, How To Replace Garage Door Rollers
Why is a spring needed in the lock of a door?
Without a spring, the lock would never unlock. Therefore, a lock of a door required a spring.
How do replace the rear door handle on 97 Chevy astro van?
how do you get the door open
