A bad relay switch will cause the windshield wipers to not turn off. Replace the relay switch and the windshield wipers should turn off.
Usually mean you have a burnt out bulb. Simply replace it and you should be fine.
remove the wipers, turn on wiper switch, turn off switch, reinstall wipers @ bottom position torque nuts enough to secure the arm. turn on switch readjust as needed.
search google for 1997 Wrangler FSM It is the factory service manual and you may find a link to download it for free. They are awesome.
your flasher is a combination unit turn & flasher on top of your diagnostics test unit on the left side of steering column
The head light wipers come on when you turn your regular wipers on.We own a Mercedes not because of people think its a status symbol,We have them because they are solid!!!
it is on the same lever you turn your front wipers on with but you twist the the last inch of it
If 4wd, yes. You place the trans in park, transfer case in neutral, and turn the ignition to unlock the steering.
The multi-function switch inside the steering column has the turn signal lever and hazard lights button extending outside of the steering column it operates - turn signals - flash to pass - high beam headlights - windshield wipers ( on/off ) and intermittent speed settings for the wipers - windshield washer fluid squirter button
Turn on your windscreen wipers.
Wipers
Sounds like you have a short between the three switches that activate the signals wipers and brakes lights You could try tracing out the wires with an ohm or multimeter You should get a service manual before attempting it though