answersLogoWhite

0

Yes both headlights can burn out at the same time, I had it happen once, it is rare. If both high and low beams are out, then I would think that it might be the switch. You could get a cheap test light and check the plug to see if there is current to the lights.

User Avatar

Wiki User

20y ago

What else can I help you with?

Related Questions

My headlights don't come on on my 1986 Chevy Celebrity?

A couple of possible reasons why your headlights don't light up: 1. Both headlights are burned out. 2. The headlight switch has gone bad. 3. There is a wiring problem.


2001 Jeep Cherokee both headlights wont work they did occasionally work after fooling with the switch what do you think is the problem?

check the plug at the back of switch it may be loose


Why dont your high beams turn on but your low beams both work on your 2000 ford expedition Is there a fuse for it?

It sounds like the low beam/high beam switch is bad. Fuses are not the problem since they are built into the headlight switch and would cause headlights to blink or not come on for both high and low beam headlights.


Why would the bright lights not work on a 2000 Mazda B2500?

Switch? both headlights?


Why 1998 cavalier low beam headlights not working?

To find the cause of the low beams not working, start with the bulb to make sure both are ok. Check the dimmer switch, and the wiring from the switch to the headlights.


You cant get the headlights to work on your corvette. The parking lights brake lights and turn signals work.?

if you've tried hitting the high/low beam switch & headlights are out on both, then a bad headlight switch or headlight switch plug or high/low beam switch plug not fully engaged.


What are the possible reasons why headlamps will not work?

I don't know what kind of car you have, but if the headlights work in either the dim or bright mode, but not both, I would suspect the dimmer switch. If they don't work at all, the headlight switch is probably the culpret, unless of course both bulbs are burned out, which I have seen on one occassion.


What would cause both headlights to go out but the running lights work on a 1995 Chevy S-10 4X4 pick up?

My money would be on the switch itself... having owned a couple Gen 2 vehicles on that platform, I've had the exact same problem... running lights would work, all other lights would work, but headlights and low beams would not... it's about a $20 part, so it won't set you back much.


My headlights work only on high beam?

Possible that both dip beam bulbs have blown


Your low beams on both of your headlights are suddenly not working on your 2003 Chevy Venture Why?

Possibly the multifunction switch (switch in columm). Check the bulbs, fuses etc first


Headlights come on by their self passenger side does not come on when you turn the switch on?

If the passenger side headlight does not turn on when you switch it, the issue could be a blown fuse, a burnt-out bulb, or a faulty connection. First, check the bulb to see if it needs replacing, then inspect the fuse box for any blown fuses related to the headlights. If both are functioning properly, there may be an electrical issue or a problem with the headlight switch itself. Consider consulting a mechanic for a thorough diagnosis.


Peugeot 306 and the dip beam of the headlights will not work The bulbs are both OK?

could be the stalk (switch) this is a separate switch to the main beam but the whole stalk needs replacing