answersLogoWhite

0


Best Answer

the #3 slot is for the parking lights #11 is for the warning lights #21 is for hazzard lights and #26 is the back up lights the #3 slot is for the parking lights #11 is for the warning lights #21 is for hazzard lights and #26 is the back up lights

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Need the fuse location for rear lights for 95 ford ranger brake lights work but rear light do not?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why do the tail lights not come on 1998 ford ranger which fuse is it?

if turn signals are working , and brake lights not working, i would replace the stop light switch on the brake pedal


What would make the brake lights and reverse lights on your 93 ford ranger not come on Bulbs are good and top brake light works?

u have a short in ur wireing.


Will the brake indicator light come on when the parking brake is set in a 1999 ford ranger?

Yes , the " BRAKE " light in your dash lights up if the emergency / parking brake is on or if the brake fluid level is LOW in the brake master cylinder in the engine compartment


Why does the brake light fuse keep tripping on your 2001 ford ranger The tail and reverse lights work fine?

The brake light fuse might keep tripping or going out on a 2001 Ford Ranger is there is a short in the line. The fault could also be with the part that tells the brake light to come on. This is located in the steering column. There is a brake light relay switch where the brake pedal is attached to the steering column.


How do you tell which fuse belongs to the rear brake lights which are not working in your 1997 Honda Accord Thanks?

It may be a defective brake light switch. The location of the brake lights fuse is listed in your owner's manual.


How can you turn off persistent brake lights on a 1995 ford ranger?

THAT IS USUALLY AN INDICATION OF A BURNED BRAKE LIGHT SWITCH. SWITCH IS USUALLY LOCATED ON THE BRAKE PEDAL ITSELF. DISCONECTED AND IF THE LIGHTS GO OUT YOU HAVE FOUND YOUR PROBLEM , SIMPLY REPLACE IT.


Brake lights don't work when the brake is pushed. Work with headlights on only.?

The brake lights and the tail lights are separate circuits. Check the brake light fuse, then check the brake light bulbs, then check the brake light switch.


What does the brake light mean on a 2008 dodge charger?

Which light are you asking about? Dashboard location would help -- Brake lights mean the brake is being applied, but I'm sure that's not what you're asking.


Can a bad bulb cause all brake lights in a 98 ford ranger to fail?

It can if it is a dual filament bulb as found on most US. makes. The brake light filament can short over to the tail light filament inside the bulb and when the brakes light is activated, all the tail lights and front marker lights will light also, probably blowing fuses.


On a 1994 ford ranger how does the brake light switchsending unit work?

The brake light switch is located near the top of the brake pedal. When the pedal is depressed the switch is activated and sends current to the brake lights. To access the switch, the under dash panel needs to be removed.


A 2001 Honda coupeautomatic does not shift off of parkingand brake lights do not functionI could not find location of brake sensor or brake lights fuse?

Check the operation of the brake light switch located usuallyat the upper section of the brake pedal under dash area


Where can you find a fuse box diagram for a Ford Explorer?

where is the fuse box locations on a 1992 ford explorer?