0
Depending on model year the now discontinued Oldsmobile Silhouette minivan type vehicle may have been equipped with a combination of pressed in and sealed wheel bearings. Sealed wheel bearings involve unbolting the hubs and replacing them with new units. Pressed in bearings must be removed, repacked with fresh grease and then pressed by industrial unit, then reinstalled. Machine shops can also repress in bearings if you do not have a press.
What else can I help you with?
How do you replace a wheel berring on an Oldsmobile regency 98?
how do you replace a wheel bearing on an 1985 oldsmobile regency 98
How do you replace a wheel berring on an 1985 Oldsmobile regency 98?
how do you replace a wheel bearing on an 1985 oldsmobile regency 98
How do you change the wheel bolts on a Oldsmobile regency 98?
you have to replace the wheel bearing hub assembly look up a picture and you will see the bolts are attached to the hub assembly.
What are signs of a bad front wheel bearing assembly on a 1997 Oldsmobile Silhouette?
Hi, I just had a left front wheel bearing replaced on my '02 Silhouette. Symptoms that the part needed to be replaced include: --Whirring noise coming from faulty bearing while driving --Noise increases when turning steering wheel to opposite side of bad bearing (e.g., moving wheel to right with a bad left bearing) --No noise while vehicle is stopped Parts could cost up to $250 depending where it's purchased and who manufactured it. Labor is about 2 hours since wheel and disk brakes have to be removed and re-installed. Hope this helps
How do you replace a 1999 Oldsmobile Silhouette front axle bearing and hub assembly sensor?
First remove wheel and brake caliper and rotor. Unplug wheel speed sensor wire. Remove axle nut. Remove three 1/2 inch head bolts from back side of spindle. Gently tap hub to remove hub/bearing assy. from spindle. Installation is the reverse.
Do you need to replace the wheel bearing when replacing brake discs on a mark 4 golf gti?
no need to replace wheel bearing unless the wheel bearing is worn out
How do you replace shock on 2002 Oldsmobile silhouette?
To replace the shocks on a 2002 Oldsmobile Silhouette, start by safely lifting the vehicle and securing it on jack stands. Remove the wheel to access the shock absorber, then unbolt the upper and lower mounting points of the shock using the appropriate socket or wrench. Replace the old shock with the new one, ensuring it’s properly aligned, and reattach the bolts securely. Finally, re-install the wheel, lower the vehicle, and test for proper operation.
What is the on off switch under the steering wheel on your 2002 Oldsmobile silhouette?
this is called the lower switch
How do you replace the rear wheel bearings on a Ford Courier?
How do I put a wheel bearing on with out a wheel bearing press
How do i replace therear wheel bearing on a Chevy pick-up?
how do you replace the rear wheel bearing on a Chevy pick up
How do you replace front wheel bearing on 1996 Hyundai Elantra?
how to replace front wheel bearing on 1996 Hyundai elentra
How do you replace a wheel bearing on a kawasaki mule 3010?
You can replace the front wheel bearing, on your Kawasaki Mule 3010, by removing the axle. With the axle Remove the wheel bearing will slide off.
