It is screewed in the engine block over by the starter.
Location of knock sensor 1991 GM sierra 350 2500?
where is knock sensor on a 2001 sierra 5.3 2wd 1500.
Sorry I meant knock sensor on 1993 Chevy blazer k1500
You have another problem other then the knock sensor if the engine will not start and run. A knock sensor will not cause the engine not to run.
The knock sensor is located under the Intake Manifold and there is a knock sensor 1/ knock sensor 2 on this model,the 2 is the one in the rear.
knock sensor location is under the intake manifold you have to remove intake their is two knock sensors front and rear
knock sensor position
The knock sensor is on the starter side of the engine. It is abut half way between front and back.
As you are looking at your truck from the front the knock sensor shoud be on the passenger side right under the manifolds
the knock sensors are located in the top of the engine block. The intake has to be removed to get to the sensors.
No, the knock sensor is not the same as a throttle position sensor. The knock sensor is used to determine if the engine is knocking caused by too much spark advance for the octane rating of the fuel being used. The throttle position sensor tells the engine computer what the position the throttle valve is in to determine gasoline flow .
check the knock sensor if that's not it try the electronic spark control moduel