Are you using an original key, or a replacement that has the proper security computer chip located in the fat plastic part of the key? If not, the car's security system will keep the ignition locked and will not allow you to turn the ignition switch. ALSO: some earlier models of Focus had ignition switches that were a problem. If you ARE using the correct key and can't turn the switch to start the car anymore, the ignition switch may have to be replaced.
Ignition switch 2002 Chrysler sebring. Original key will not turn? Is there a fuse or replace the switch?
Check all the wire coming out of the ignition switch, make sure that theres no bare wire or shortage between them or to the body..If wires are ok, your ignition switch needs to be replaced.. the switch doesn't turn with the cylinder..
Set your light switch to "auto" on the dash and your lights will come on automatically with the ignition. Turn your light switch on your dashboard to "auto" or "automatic" and the lights will come on and off with your ignition switch.
Ur life suck that why
change ignition switch and/or tumbler
i would check all fuses and the ignition switch
Yes, the ignition switch must be in the ignition position -not- the accessory position.
Set the multi-information display to TRIP A. Turn the ignition switch off. Press and hold the ODO / TRIP switch, and turn the ignition switch on (IG). After turning the ignition switch on (IG), keep holding the switch for at least 5 seconds.
Defective ignition switch.
You know your ignition switch has gone out when you turn the key and there is no click or any noise at all. If there is a click or other audible noise it is probably the spark plug or something of that sort.
99 jeep Cherokee Laredo stay running after turn off the ignition switch?
1. Turn the ignition switch to the ON position. Do notstart the engine.2. Fully depress the accelerator pedal, slowly, three timeswithin 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.1. Turn the ignition switch to the ON position. Do notstart the engine.2. Fully depress the accelerator pedal, slowly, three timeswithin 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.