0
What else can I help you with?
What socket is needed to remove 91 cavalier wheel cylinder bolts looks like reversed torx?
Any type of socket can be used to remove a 91' Cavalier wheel cylinder bolt that looks like a reversed torx. However, make sure the socket is a bolt head socket.
What size socket do you require to remove cylinder head bolts on a Hyundai coupe v6?
10mm
What style of socket is used to remove cylinder head bolts on a 2003 Kia Rio?
It takes a 12 point 12 mm socket
What size are 99 Chevy cavalier alternator bracket bolts?
My 1997 Chevy Cavalier with 2.2L motor used a 15mm socket.
What size torx socket is used to replace the hub assembly on a 2002 Chevy Cavalier?
T-55 Torx Socket (DO NOT USE AN ALLEN WRENCH) - To remove the 3 bolts that secure hub assemble to steering knuckle. 1 -3/16 deep socket - To remove axle spindle nut.
What size socket for cylinder head bolts Toyota 7a-fe?
10mm 12-point socket
How do you replace the thermostat located on a 1988 Chevy Cavalier 4 cylinder automatic?
Remove the water supply hose from your 1988 Chevy Cavalier thermostat housing. Remove the thermostat housing bolts. Lift the old thermostat out and drop in the new thermostat.
How do you change your fuel pump on your 1988 Chevy cavalier 4-cylinder .?
Remove the wiring harness from your 1988 Chevy Cavalier fuel pump. Remove the fuel lines from the fuel pump. Remove the fuel pump retaining bolts. Reverse the process to install the new fuel pump.
How do you remove tight cylinder bolts?
Put a length of steel pipe over the end of the socket handle, so you get more leverage. Pull steadily, with no jerks.
What is torque on the head bolts 2002 Cavalier 2.2?
The 2002 Cavalier 2.2 liter engine cylinder head bolt torque specification is 120 pounds. The cylinder head bolts should be torqued in 40 pound intervals.
What is the size Head Bolts on a 2000 Chevy cavalier 2.2?
The head bolts on a 2000 Chevy Cavalier with a 2.2L engine are typically 10mm in diameter. They usually require a 12-point socket for removal and installation. It's important to follow the manufacturer's torque specifications and sequence when reinstalling them to ensure proper sealing of the cylinder head.
What size star socket do you need to take off caliper bolts on 1997 Chevy cavalier?
T55
