The gem module on an 03 Ford Explorer is under the dash. It is just to the left of the radio.
I BELIEVE the GEM is in the center stack of the dash , behind or just to the left of the radio in your 2001 Ford Explorer Sport ( can anyone confirm that ? )
I believe the GEM is in the center stack of the dash and that the radio has to be removed to gain access
Where is the ecm on a 03 explorer
I believe it is in the center stack of the dash , and that the radio is removed to gain access to the GEM
You can find the module for your 2000 Ford Explorer on the firewall in the engine compartment. The module will be on the drivers side of the firewall.
60.000
I'm not sure if your Ranger is the same , but on my 1995 Explorer with a similar dash the GEM is in the center stack of the dash , to the left of the radio On a 1997 Ford Ranget 4x4 the Gem module is located as stated above. Behind the radio and to the left.
"Generic Electronics Module" It is used on 1995 and later models according to my Haynes manual.
Because you reversed the polarity and destroyed the GEM?
I believe it is in the center stack of the dash and if you need to change it you have to remove the radio
The GEM (Generic Electronic Module) on a 2000 Ford Explorer is a central control unit that manages various electrical functions and systems in the vehicle. It oversees features such as lighting, door locks, window operation, and the anti-theft system. The GEM communicates with other modules in the vehicle to ensure proper operation and coordination of these functions, contributing to overall vehicle performance and convenience.
The Gem is located in the center stack of the dash to the left of the radio The GEM offers diagnostic codes to locate failures - see a Ford dealer If you need to change the GEM , disconnect your negative and then positive battery cables before pulling the radio to gain access