There is a roll over switch located under the driver side dash behind the brake pedal. small black box with a round red trip button and 2 wires going to it
It is located under the driver side headlight.
The jack should be located under the hood, on the passenger side.
On the interior firewall to the left of the steering column
On a full sized Bronco, it is located in front of the fuel pump between the frame rails near the drivers feet.
The PCM for the 89 Bronco is located on the firewall on the driver side. You can access it from inside the cab, behind the parking brake pedal.
yes
emissionswhere is the air charge temp located for a 1987 ford crown Victoria 5.ol
A 1989 Ford Bronco II has a ( 2.9 liter / 177 cubic inch V6 engine )
Follow the top radiator hose from the radiator , where it connects to the engine is where the engine thermostat is located
Yes. The Bronco body style didn't change again until after 1989.
On a 1996 Ford Bronco : The 5.0 and 5.8 litre V8 engines from the factory are fuel injected , so there is no carburetor ( the 4.9 litre inline six cylinder engine was not offerred in the 1996 Ford Bronco model )
The oil pump is bolted to the bottom of the engine , inside the oil pan