No you do not have to remove the timing chain. Look on the PASSENGER SIDE, FRONT ENGINE AREA, MOUNTED REAR OF WATER PUMP.
unbolt lens, remove bulb socket quarter turn
It is inside the fuel tank. You have to remove the entire tank to replace it. I just did mine and it cost $1350!
If there is not an access hole in the rear trunk type area you will havfe to remove fuel tank to access
Begin by removing the wiring harness from your 2000 Pontiac Grand Prix transmission pressure solenoid. Remove the solenoid retaining screws. Reverse the process to install your new transmission pressure solenoid.
remove wheel, caliper,brakes,rotor. unplug abs connector and unbolt hub. install is reverse.
Remove the bolts, remove offending fan and replace with new one
To change the key switch in a 1993 Pontiac Transport, first disconnect the negative battery cable to ensure safety. Remove the steering column cover by loosening the screws, then locate the ignition switch. Disconnect the wiring harness and remove the mounting screws to replace the switch. Reassemble everything and reconnect the battery.
show me how to remove or replace an alternator for a 2001 Pontiac Aztec along with diagram?
To replace the thermostat on a 1996 Pontiac Transport, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose attached to the thermostat housing. Unbolt the thermostat housing to access the thermostat, replace it with a new unit, and reassemble by reversing the disassembly steps, ensuring to refill the coolant and check for leaks.
Remove the dash. This job is NOT easy.
To check the fuel pressure on a 1998 Pontiac Transport, you'll need a fuel pressure gauge. First, locate the fuel pressure test port on the fuel rail, then remove the cap from the port. Attach the gauge securely and turn the ignition to the "ON" position without starting the engine to read the pressure. The normal fuel pressure range for this vehicle is typically between 40-47 psi; if it's outside this range, further diagnosis may be needed.
To replace the front door latch on a 1992 Pontiac Transport, first, remove the interior door panel by unscrewing any screws and gently prying off clips. Once the panel is off, disconnect the wiring harnesses and remove the bolts securing the latch to the door. Replace the old latch with the new one, reattach the bolts, reconnect the wiring, and finally, reassemble the door panel. Test the latch to ensure it functions correctly before finishing up.