It is stuck into the small diameter neck of the evaporator core.
What orifice tube?
Thru the transmission dip stick. use a funnel to get the fluid into the dipstick tube and check to make sure you do not overfill.
how to replace shifter tube
in the transmission dip stick tube with a funnel
On a 2005 Ford Crown Victoria , the Mass Air Flow Sensor is in the top of the engine air filter housing just before it connects to the big engine air intake tube
As far as I know, all automatic transmissions get filled through the dipstick tube.
Air tube leading away from air filter box. Sometimes attached to the top of the air filter box
At the automatic transmission dipstick ( and filler tube ) using a funnel It is located near the firewall towards the passenger side of the engine
District Line (London Underground) from Hammersmith tube station to Victoria tube station.
There is no direct tube line between Shaftesbury Avenue and Victoria. You will have to change at Green Park.
I'm not a mechanic / technician but I believe the PCV valve or hose is plugged causing pressure to build up inside the engine
On a 1996 Ford Crown Victoria : The Mass Airflow sensor should be between the engine air filter and the big rubber engine air intake tube ( I don't know if it is inside a plastic housing like it is on my 1995 Ford Explorer but you will see where the connecting wires go inside )