below the alternator towards the fire wall.......your going to need a 15 mm wrench, I use a long rachet-wrench from the top, but you can also remove the plastic cover on the bottom to access it.
To loosen the tension on a serpentine belt on a 2005 Grand Caravan 3.8L, turn the nut of the belt tension pulley to loosen it. Adjust the belt, then tighten the tension pulley by turning the nut in the opposite direction.
how do i find the auto tension release for the serpentine belt on a 2004solara
The tension on a serpentine belt is automatically set by the Idler Tension Pulley. If you find it is not correctly setting the tension, the the spring may be broken.
Most serpentine belt systems have a self adjusting tensioner.
The zd30 has a hydraulic tensioner using an idler pulley to automatically tension the serpentine belt.
I need daigram of 2001 ford focus se serpentine belt
If it is a drive belt and not a serpentine belt is has no tensioner. You manually adjust the tension by normally adjusting tension by moving the alternator. Loosen to bolts holding the alternator in place and then adjust the tension. Tighten the bolts when the tension is right. If it is serpentine belt if you follow the belt around the the engine you will see the tensioner.
If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.
If it
you do not adjust tension on a serpentine belt the tension is automatcally adjusted if the belt is loose, replace the belt SOME TIMES THE TENSIONER CAN BE WEEK ALSO.
how do you change the serpentine belt on a 2005 kia sodna
The correct belt tension will be maintained by the belt tensioner. The tension is not adjustable on this car.