On a Jeep Hemi engine, the starter motor is typically located on the passenger side of the engine, mounted to the transmission bell housing. It is positioned near the bottom of the engine, making it relatively accessible from underneath the vehicle. To replace or service the starter, it's often necessary to raise the vehicle for easier access.
Look at the lower rear of the engine
5w20
The Jeep 5.7L V8 HEMI engine has 16 spark plugs (2 for each cylinder)
The Hemi engine is only available in the Grand Cherokee and Commander lines, none of which are available with a Golden Eagle package.
The starter is on the lower passenger side of the engine.
It is at the rear of the motor. Follow the largest cable from the battery(RED CABLE) to the back of the motor and it will end at the starter.
Depends on the motor. The 5.7 HEMI takes 5-20W and only 5-20W or else the check engine light will come on with an error for the wrong type of oil. Check to see what motor you have, then get the specs from jeep's website. You can download an owner's manual from the jeep website for your specific model.
A 4.0L jeep engine is a six cylinder engine.
The starter is located under the Jeep on the drivers side. There is a guard plate that has to be removed to access it. It is right when the transmission connects to the engine.
About 1 hour at the most.
Under the hood, close to the motor.
its on the left side behind the motor but before the transmission