It depends on whether the distributor has been replaced or removed, and whether they put it back the same way. In any case, #1 is wherever the rotor is pointing when #1 is at TDC of compression cycle.
yes as long as you swap electric parts
18436572
The left bank is 1,3,5,7 and the right bank is 2,4,6,8. The distributor turns clockwise.
If you remove the distributor cap and rotor you will see it bolted to the plate and it will have electric wires pluged into it. It will be on the right side of the distributor.
at 11 Oclock
Need to know what engine it has.
how to repace the distributor on an 98 chevy silverado
Align the rotor with the number one position on the distributor cap, then with the engine at TDC insert the distributor. There may be a mark on the outside of the distributor to help.
Look at the back of the intake where the distributor is. Now look behind the distributor and you will see it. it is about 3 inches long with a electric wire pluged into it. It is alittle tough to get to.
what is the distributor setting for a 1996 Chevy blazer
I would replace the module in the distributor. Take the distributor cap off and it will be the idem that has 2 small screws that hold it on the base of the distributor, and it will have electric wires that hook to it. The module controls the fuel and fire.
no