0
What else can I help you with?
Starter stays engaged?
starter gear is to close to flywheel install starter shim
Why does 1994 dodge ram starter stays engaged?
The starter has probably failed.
Why might the problem be if a '92 3.0 Ranger makes a squealing noise when you start it and then will not turn off?
i would take a good guess that when the starter is engaged through the sylenoid that it is sticking and when you go to shut it off it stays engaged
What is the problem when the starter stays engaged on a E350 Motor home?
either the starter is worn out and needs rebuilding, or the battery is bad
Why would it sound like the starter stays engaged when reconnecting the negative battery cable after installing a new starter?
Well you might want to check the wires that connect back to the starter. If you missed one that should be bolted to the starter it'll be hanging or stuck somewhere - most likely touching metal. If it is touching any metal it will always try to engage when you hook up the other end of the wire to the battery. -Sara replace your selonid
Why does my1999 van just clicks sometimes when you try to start it and sometimes the starter stays engaged?
sounds like your in the market for a starter.
What does it mean when you Replace starter and when you go to connect cables to battery the starter starts and stays on without key in ignition until you remove cable from battery?
The wires to the starter are probably connected wrong.
Why fule gauge reading stays in full?
i have a 1990 ford ranger and my fule gauge always reads full, why?
Why would the starter on a Tahoe keep firing without turning the key in park or neutral?
Sounds like the solenoid on top of the starter is bad. If the plunger return spring is broken, the starter stays engaged all the time.
How do you reset the gas pump setting on a 1992 ford ranger?
Fill it up. If it stays on with a full tank, then the sensor is bad.
1989 Chevy berreta car stays running after key is off and pulled out?
Try a new starter or ignition.
If you have a smallblock 305 your starter stays engaged anybody knoe why?
your relay is broken, a wire is crossed, or the selonoid on the startr is bad.
