0
Why does the 1991 Dodge Stealth jerks in every gear unless excelerating and then it runs smooth and could the timing belt tension cause this problem?
No the Timing Belt has Nothing to do with the Transmission. When was the last service you had done on the Transmission. Regular Service Keeps Your Transmission on the Road…
Servicing your car’s automatic transmission regularly can dramatically extend its life. That’s because the oil — or ATF — does more than just lubricate: It also helps drive the transmission. Damage to the fluid, such as oxidation and shear, will reduce its holding power. This allows the transmission to slip and overheat, and quickly cause it to fail. A complete fluid exchange service, performed annually, can add years to your transmission’s life. For Example GMC say's this about Automatic Transmission Fluid and Filter Replacement Interval:
Every 100000 miles unless the vehicle is mainly driven under one or more of these conditions:
1) In heavy city traffic where the outside temperature regularly reaches 90 F (32 C) or higher.
2) In hilly or mountainous terrain.
3) When doing frequent trailering. Good Luck and Remember.
Change Your Mind, Not Your Oil.
Use the First In Synthetic Motor Oil's.
See My Bio For Information & Contact Details.
What else can I help you with?
Can smooth muscle maintain an even amount of tension?
Smooth muscle tissue is able to maintain an even amount of tension for periods of times. This is helpful in its function of expelling the contents of an organ.
How do you adjust the tension knob on a sewing machine to ensure smooth and even stitches?
To adjust the tension knob on a sewing machine for smooth and even stitches, turn the knob to a higher number for tighter tension or a lower number for looser tension. Test the stitches on a scrap piece of fabric until they are even and balanced.
Which pulley exactly is the tension pulley?
It will be one of the smooth ones with no ribs.
Why is water reflective?
The surface tension of the water creates a smooth surface. Light, as well as images captured by the eyes, are reflected on that smooth surface.
Whats wrong With A 91 stealth that wont start until the second time you try Also it drives smooth but when you get to a complete stop the car shakes and in the battery meter the neddle moves up and do?
my 92 stealth rt has the same problem even worse it stalled every red light. I went to a local machanic in windsor ontario. He just pop the hood tight somthing inside and its been 2 years never have the problem again.but sorry to say I dont know what he did.
How can I properly adjust the tension on my bicycle pedal to ensure a smooth and efficient riding experience?
To adjust the tension on your bicycle pedal for a smooth and efficient riding experience, use a pedal wrench to tighten or loosen the pedal. Start by positioning the wrench on the pedal axle and turning it clockwise to increase tension or counterclockwise to decrease tension. Test the tension by riding the bike and adjusting as needed until it feels comfortable and efficient.
What kind of muscle can stretch or maintain tension for long periods of time?
Smooth muscles.
Why does water bead up on a smooth surface?
Water beads up on a smooth surface due to surface tension, which is caused by the cohesive forces between water molecules. This surface tension minimizes the contact area between water and the surface, causing the water to form beads to reduce the energy required to maintain the surface tension.
What has resting tension?
GI tract smooth muscle has resting tension which results from slightly elevated levels of intracellular Ca2+. This tone is modified by neutransmitters, hormones, or drugs.
What is the 1991 dodge stealth engine firing order?
The 1991 Dodge Stealth, which features a 3.0-liter V6 engine, has a firing order of 1-2-3-4-5-6. This means that the cylinders fire in that specific sequence, which helps ensure smooth engine operation. The Stealth was known for its performance, and understanding the firing order is crucial for maintenance and tuning.
Would a bad gasket on your tension pulley cause your belt to not run smooth?
there are no gaskets on a tension pulley ther is however a spring and yes it can cause the belt not to run smoothly
What is computer crisis?
they are problem that affect the smooth running of the computer
