0
The 1997 Oldsmobile LSS is known for transmission issues primarily due to design flaws and inadequate cooling. The transmission may overheat, especially if the fluid is not regularly maintained or if the cooling system fails. Additionally, worn components or poor driving habits can exacerbate these problems, leading to premature transmission failure. Regular maintenance and monitoring can help mitigate these issues.
What else can I help you with?
What is the bolt size caliper for a 97 Oldsmobile lss?
27
How do you change an ignition on a 97 Oldsmobile LSS?
To change the ignition on a 1997 Oldsmobile LSS, start by disconnecting the negative battery terminal to ensure safety. Remove the steering column covers to access the ignition switch, then disconnect the wiring harness from the ignition. Use a screwdriver to remove any screws securing the ignition switch, and replace it with the new one. Reassemble the steering column, reconnect the battery, and test the ignition to ensure it's functioning properly.
How do you change supercharger oil on 97 Oldsmobile lss?
To change the supercharger oil on a 1997 Oldsmobile LSS, start by locating the supercharger's oil fill plug, usually found on the side of the supercharger unit. Remove the plug and use a pump to extract the old oil from the supercharger reservoir. Once drained, replace it with the appropriate supercharger oil, ensuring it's filled to the correct level as specified in the owner's manual. Finally, reattach the fill plug securely and check for leaks.
What if your interior lights are not working 97 Oldsmobile delta lss Ive checked the fuses but there good any ideas?
On my Lss 1997 it was the Positive battery cable. It was making a good connection to start the car but it wasn't making a good connection to keep the interior lights on. May need to take the positive cable loose and see if one is corroded and either clean it or replace it.
What year of escorts transmissions will fit a 97 escort wagon?
97 through 02.
What is the torque specification for the lower intake manifold on a 97 3800 oldsmobile LSS and what is the sequence for tightening the bolts?
The torque specification for the lower intake manifold on a 1997 Oldsmobile LSS with a 3800 engine is typically around 18 lb-ft (25 Nm). The recommended tightening sequence involves starting from the center bolts and moving outward in a crisscross pattern to ensure even pressure distribution. Always refer to a service manual for the exact sequence and specifications, as they can provide the most accurate information for your specific vehicle.
Will a 97 Dodge 318 trans work in a 97 Dodge 360 trans?
The transmissions should be the same, but the torque converters are different.The transmissions should be the same, but the torque converters are different.
Is 97 and 99 cavalier transmissions the same?
The 1997 and 1999 Chevy Cavalier transmissions are exactly the same. The transmissions, transmission linkage, and transmission mounts are identical.
Is Chevy 98 and 97 silverado z71 5.7 4x4 transmissions compatible?
What different transmissions come in the 98 silverado 5.7 4x4 and
Where is the reservoir for the power steering on a 1998 lss Oldsmobile?
On my 97 it is on the passenger side basically in front of the glove box, but it is a decent arms length into the engine compartment. If you are standing on the passenger side looking into the engine, look directly below the torsion bar behind the alternator in front of the glove box. Thanks, Josh
How are 24's on a 1994-97 Oldsmobile Cutlass?
ghetto.......
Does the 97 Oldsmobile 88 have front wheel drive?
Yes
