A 2000 Mercury Sable might have a vibration at low speeds after changing the Transmission Fluid because of a lack of fluid or leaking fluid. Check the transmission case for leakage and check the fluid level before driving again.
On a 1999 Mercury Sable : The transaxle ( transmission ) is located in the engine compartment , bolted to the engine
yes
The Mercury Sable transmission has a fluid capacity of 12 quarts. You can use any SAE certified automatic transmission fluid.
Inside the transmission
NO it don't. It is a electronic controlled transmission.
According to the 2000 Mercury Sable Owner Guide : ( Motorcraft MERCON - V , automatic transmission fluid in both types of automatic transaxle / transmission )
On the transmission.
In a 1998 Mercury Sable : The transaxle is the transmission on your front wheel drive Mercury Sable it is located in the engine compartment , on the drivers side , bolted to the engine
Replace your transmission pump or get a new transmission.
Mercon V
On a 2001 Mercury Sable : The automatic transaxle ( transmission ) fluid level dipstick is near the firewall , in the area of the brake fluid reservoir , in the engine compartment
According to the 1999 Mercury Sable Owner Guide : ( Motorcraft MERCON-V automatic transmission fluid ) ( to confirm the type used , it should be engraved in the automatic transmission fluid dipstick )