answersLogoWhite

0

Fuses that "keep blowing when replaced" Fuses and Circuit Breakers are safety devices designed and installed in electrical circuits TO PROTECT the conductors [wires] from short circuits and overload conditions which can cause extreme overheating that can result in damage to the insulation and the conductors, and worse, the possibility of a FIRE which could destroy the vehicle. When a fuse, and replacement fuses blow, especially if it happens repeatedly, is an indicator of an UNSAFE CONDITION in that circuit, usually a short. Do not install a larger fuse in a misguided attempt to correct the problem. To install a larger fuse would almost guarantee damage to the wiring and an electrical system fire. The proper "fix" is for a qualified technician, who knows what he/she is doing, to troubleshoot the circuit, find and identify the defect, and make proper repair [s], BEFORE replacing the fuse again [with the properly sized fuse].

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do SET timing on a 1998 ford contour se?

Ignition timing is automatically set. sorry.


Disarm 1998 Ford Contour alarm?

To disarm the alarm on the 1998 Ford Contour, simply turn on the ignition using the vehicle's key. You can also disarm the alarm using the key fob.


Does the 1995 Ford contour have a computer chip keyed ignition?

No. The chipped ignition key did not start until the 1998 model year and was only on the 6 cylinder Contour and Mystique. (I've got a '97 6 cylinder Contour that seems to have a chip in the key.)


What would a 1998 contour new engine cost?

about 3800


How do you install a radiator in a 1998 Ford Contour?

How do you install a radiator in a 1998 ford contour?"


How do you program a new key for a 1998 ford contour?

The keys on the 1998 Ford Contour are NOT chipped


Where is egr valve 1998 2.0 contour located?

where is egr valve on 1998 ford contour


How do you remove key switch Ford Contour?

how do I remove the key switch from a 1998 ford contour You have to remove the plastic trim around the steering column (behind the steering wheel). Put the key in the ignition cylinder and turn one click. There is a small hole on the side of the ignition cylinder, stick a small screwdriver into this hole and press hard. Pull out the ignition cylinder with the key.


1998 Ford contour What is the main power supply?

The battery is the main power supply of the 1998 Ford contour.


What would cause 1998 ford contour transmission to pitch and buck?

broken motor mount


Can a 1995 contour gas tank fit in a 1998 contour?

yes it will fit


What is the hub nut size on a 1998 ford contour 2.5?

I have a 1998 Ford Contour with 6 cylinders 2.5L and they are 32 mm.

Trending Questions
What do you need to do if both your brake lights are out in the rear of your 1998 Ford Coutour but your rear window light works the fuse and both lights are good and the signal and driving light work? How do you replace the front passenger window lift cables and plastic connectors in a 2000 Chevy Silverado 1500 pickup? How do you change the license plate light on 1999 Cadillac eldorado? What would cause the speedometer to not work and the odometer to work on a 1999 Mercury Cougar? Can you switch manual transmission to automatic If so how much does it cost estimate? Diagram on the engine of a 2001 Oldsmobile silhouette you need to replace the thermostat? How do you install a thermostat on a 1991 Chevy Astro van? Why would gas leak from the passenger rear tire area on your 1996 dodge neon? How can you fix the rear windshield wiper motor on a 2002 Jeep Liberty? How do you change a fuel pump for a Ford E350? How much horsepower does 2001 crown vic p71 have? Where are the Mustang car headquarters? Firing order 1996 Chevy Tahoe? Where is the map sensor on a 1998 Pontiac Bonneville? What is the Firing order for 2.5 liter dodge? How much oil does my 2003 Ford Expedition carries? What would cause the side window to shatter in a dodge caravan? Why won't cruise control engage on 94 cadillac sedan deville dash says its on but doesn't hold speed? Does anyone have a diagram of a distributor cap for a 2000 Chevy 2.2L 4 cylinder? What is the turning circle of the 2004 Cadillac SRX?