Yes!
The parts of a 1994 model mustang are only interchangable with parts of the same year, 1995, 1996, 1997, 1998, and 1999.
A 1997 uses Mopar ATF+4 as the trans fluid.
The 1997 Ford Mustang uses an electric engine cooling fan . The electric motor and the fan it drives are in a housing attached to the radiator between the engine and the radiator
I think1993-1996 had 275hp then in 1997 285hp
Two on the engine, one on the trans.Two on the engine, one on the trans.
Yes, it will fit.
stock 285 ram air stock 305 bhp
You can swap a 1997 Mustang V6 into a 1968 Mustang. You will need to make several modifications to the 1968 Mustang.
Yes it will fit.
They are located near the axles. You will need an 18 MM wrench for this.
1994 to 1997 were all in-line 4and later changed to a slant 4 in 1998 all those years the automatic transmissions were interchangeable as well. Hope it helps.
All you need to do that swap is different motor mounts, ones that will match up to the body (1997). The motor is the same and will run but for the easiest/safest swap you should bring the ECU (the car's computer), wiring, and transmission from the 1999 donor car.