For a 1970 Dodge Dart, the clutch torque settings typically are around 12-15 ft-lbs for the pressure plate bolts and approximately 20-25 ft-lbs for the flywheel bolts. It's essential to follow a star pattern when tightening the pressure plate to ensure even distribution. Always refer to a specific service manual for your vehicle for the most accurate and detailed specifications.
All Dodge Darts are A Bodies.
not as far as I know.
off blue if I remember right.
I believe it was a 7.5
between 3,000 and 3,200 Lbs.
Yes, a 318 will fit a 6 slant engine in a 1970 Dodge Dart. You will need to also have all a bigger radiator, new engine mounts, fuel line, and clutch to name a few.
Yes, a 318 will fit a 6 slant engine in a 1970 Dodge Dart. You will need to also have all a bigger radiator, new engine mounts, fuel line, and clutch to name a few to complete the project.
There is no 'clutch switch' on a Beetle.
There's normally an adjustment on the clutch rod which activates the clutch fork on the transmission.
No, Dodge hasn't used points since the 1970's.No, Dodge hasn't used points since the 1970's.
Dodge Colt was created in 1970.
Dodge Challenger was created in 1970.
Clutch plates are sticking - get your clutch checked you might need a new one
In 1970, Dodge produced a total of 4,999 Coronet convertibles. This model year marked the final production of the Coronet convertible, as Dodge discontinued it after 1970. The 1970 Coronet was part of the larger Dodge Coronet lineup, which included various body styles and configurations.
1970
The stock clutch for a 1969 z28 is 10.5". The 1970 z28 went to a 11".
1970