this locking mechanism is built into all cars, on this model you cant disable that feature. if you take the steering wheel and turn it so its not pushing against the lock pin in the key switch, then turn the key, it should turn easily. If you park your Camry with the front wheels pointed straight ahead, you will avoid this problem, as there will be no presure against the locking pin. If you do find the ignition locked, follow instructions in previous answer, but also be sure to firmly depress the brake pedal as you gently turn the steering wheel back and forth while at the same time trying to turn ignition key. Do NOT try to force the key, when you find the right spot for the steering wheel, the key will turn easily. p.s. if auto transmission, be sure its in PARK.
1997 Toyota Camry Key Wont turn, Ignition Lock problem -1997 toyota camry FIXED!!! I see a lot of Douches with a capital D trying to charge people to fix this extremely common issue with this Camry ignition cylinder. OK pull the plastic guard off encasing the steering column. Get a phillips head screwdriver and remove the 2 screws holding the little off-white connector at the rear of the module(it has the wires to the ignition running to it). Get a pair of pliers or a small crescent wrench and while trying to turn the key use the wrench to turn the little rod sticking out of the back of the module. Make sure your turning it WITH the direction the key is trying to turn it. It should immediate be freed. Voila IT WORKS! AND THATS WHY PEOPLE DONT TRUST MECHANICS! HOW CAN YOU CHARGE SOMEONE FOR THAT INFO?
You may have pressure on the steering wheel locking pin. Try moving the steering wheel one way or the other while trying to turn the ignition key.
It could be the wrong key...not inserted completely (or inserted to far if the lock is damaged)...the steering wheel lock could be exterting extra pressure on the lock (try moving the steering wheel a bit to see if that helps)
Try jiggling the steering wheel while turning the key. Sometimes if the wheels are slights turned when you shut it off the steering wheel is pressed against the ignition switch inside the column. If that doesn't do it you probably will need a new key.
To do this, first disconnect the battery so the air bag doesn't go off in your face. Remove the two machine screws behind the steering wheel that fasten the air bag to it. Lift off the air bag and disconnect the wires to it. Next you will need a special steering wheel tool to compress the strong tilt wheel spring. I'm not sure what parts might be broken in your car but they are fragile plastic parts that are available at the parts counter of your local GM dealer.
The power window fuse in a 1997 Volkswagen Jetta is located above the relays. The relay/fuse box is usually located near the steering wheel.
i have a 1997 Chevy Tahoe and the steering wheel will locked up when am making a turn or a curve
The port is under the steering wheel, at very bottom of the plastic panel.
You need to get a special tool, steering wheel puller. If you have it, disconnect the battery. Remove the steering wheel air bag (there are two screws holding it in place). Disconnect the bag harness. Remove the center steering wheel nut. Using the puller remove the steering wheel. Installation is reversed to removal.
how do you fix play in a 1997 mercury mountainer steering wheel
no
The inside fusebox on a 1997 Camry is to the left of the steering wheel, where that little "change" drawer door is. Open it up and remove it-it is behind that. Glad I could help a fellow "Camryrian."
by changing the steering wheel and fixing wats rong wif tha steering
y
Camry 1997-2001 uses the same fluid for transmission as well as power steering.
For the 1997 Mercury Villager, the limited tilt steering wheel is very limited. This is likely due to design constraints.
Under the steering wheel, you need to remove the panel under steering wheel.
On the steering wheel.